$16,900
108.7 miles away - HOLGATE, OH
FULL FINGER AUGER, VERY NICE HEADER, 30' flex head, CIH narrow throat multi point hooukps, PTO drive shaft, double drive, 3" knife, safety lights, QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$15,900
658.8 miles away - GLENCOE, MN
30'SINGLE DRIVE SICKLE HEADER,FULL-FINGERED AUGER,LONG DIVIDERS,3" COURSE SECTION CUTTERBAR,STD CUTTERBAR FLEX,AHHC & FIELD TRACKER
$14,900
704.6 miles away - SAINT MARTIN, MN
25' ,DOUBLE DRIVE ,STANDARD AUGER ,LONG DIVIDERS ,PLASTIC TINE REEL ,3" COURSE SECTION CUTTERBAR ,AUTO HEADER HEIGHT ,TRACKER
$14,900
94.2 miles away - DELPHOS, OH
2005 CIH 1020, grain head, 30' width, fore & aft, field tracker compatible, 3" knife in great shape, very clean late model head, always stored inside....$14,900
$14,500
693.5 miles away - REDWOOD FALLS, MN
Exterior Color: Unknown, Exterior Color (Generic): Unknown, Interior Color (Generic): Unknown, New: Used
$14,500
47.5 miles away - BELLVILLE, OH
2006 CIH 1020 30', spare cutterbar, hydraulic fore/aft, good auger, header cart included, nice and ready to work! Call or email for more information.
$13,000
682.0 miles away - KIMBALL, MN
25 foot ,Standard auger ,Medium dividers ,Plastic tine reel ,3 inch course section cutter bar ,Standard cutter bar flex ,Auto header height
$12,500
659.6 miles away - DENISON, IA
30', 3" Knife, Crary Cutter Bar, Full Finger Auger, Field Tracker Sensors, Johnson Rock Guard, Hyd Fore/Aft, Rod Linkage AHHC, Reel Bushings & Pans Good, Poly, Above Average Head
$11,900
683.0 miles away - SAINT CLOUD, MN
25',Single drive,Std auger,Med dividers,Plastic tine reel,3" course section cutterbar,Std cutterbar flex
$11,250
487.8 miles away - WAUSAU, WI
$10,900
658.8 miles away - GLENCOE, MN
25',single drive,std auger,med dividers,plastic tine reel,3" course section cutterbar,std cutterbar flex,auto-header height (rigid operation)
$10,750
349.9 miles away - MC DONALD, TN
Case IH 1020 15' Grain Head Double Drive, Oil Bath, See Thru Pipe Reel, Has All Fingers In Auger & Reel, Good Poly On Bottom, Runs Out Smooth, Hard Size To Find.
$10,500
388.7 miles away - WAUPUN, WI
$10,000
744.4 miles away - WASHINGTON, KS
double header drive, fits 2300 series combines, price subject to reconditioning
$10,000
708.6 miles away - WILLMAR, MN
30' Header,Double drive,Std Auger,Med Dividers,Std Cutterbar Flex,3" Course Section Cutterbar,Auto-Header Height
$10,000
99.9 miles away - AMHERST, OH
Case IH 17 1/2 hydraulic fore and aft, 3" sections, nice...$10,000
$9,950
659.6 miles away - DENISON, IA
30', 3" Knife, Field Tracker Sensors, Hyd Fore/Aft, Long Dividers, Poly Skids, Good Reel Bushings, Center Pan OK, Shedded & Kept Up
$9,950
637.3 miles away - CARROLL, IA
$9,950
526.5 miles away - CRESCO, IA
Stock # 24065, 25', standard reel, double drive line 540 pto, 3" knife, hyd fore/aft reel Condition: Good 25.00 FEET 3" knife dual 540 pto drive lines, standard reel
$9,950
434.6 miles away - DUBUQUE, IA
Auger: No, Auger Full Finger: No, Gathering Type: Auger, Hydraulic Hookup: MultiPoint, New: Used, polyskidshoes: Yes, splitreel: No, stonedam: No, Stubble Lights: No, Width (feet): 20
$9,900
47.5 miles away - BELLVILLE, OH
Case IH 1020 CIH 16.5 ft, pipe reel, all new guides in auger fingers, hydraulic fore/aft, this head is nice!! Call or email for more information.
$9,900
346.0 miles away - BLOOMSBURG, PA
Auger Full Finger: No, Gathering Type: Auger, Hydraulic Hookup: MultiPoint, New: Used, stonedam: Yes, Width (feet): 20
$9,900
708.6 miles away - WILLMAR, MN
Header size 20',Single drive,Std auger,Med dividers,Plastic tine reel,3" Course section cutterbar,Std Cutterbar flex
$9,900
98.6 miles away - FORT RECOVERY, OH
Case IH 1020-17.5' grain head, Stock #13350, hydraulic fore and aft, see-thru reel, auger has no dents, double drive on PTO, has poly under the cutter bar, very good condition.
$9,900
709.2 miles away - WAMEGO, KS
Header Height Control-Single Sickle. , Width - 30, Reel - Pickup, Header Height Control
$9,900
357.3 miles away - LITITZ, PA
Case IH 1020 Flex Head, 15' Wide, Hydraulic Fore & Aft, Lateral tilt sensors, good poly, 1 year on sickle
$9,500
388.7 miles away - WAUPUN, WI
3 inch cut,F&A
$9,500
98.6 miles away - FORT RECOVERY, OH
Case IH 1020-25' grain head, Stock #12740, flighting extensions, Johnson rock guard, like new SCH cutter bar, hydraulic fore & aft.
$9,500
659.6 miles away - DENISON, IA
25', 3" Knife, Field Tracker Sensors, Hyd Fore/Aft, Long Dividers, Ran on 2577 Combine
of 5
Filter by State
