$127,500
410.4 miles away - APPLETON, WI
Hours: 415
Used Case 850M LT Dozer, 2023, 415 hours, enclosed cab with heat and A/C, front sweeps, 3 shank ripper on back with hitch, front pull hook, center rock guard, cold start, pump hydraulic equipped with PTO, 112" 6 way PAT dozer blade, factory fit with Lieca Co-Pilot, 18" tracks, tracks and undercarriage 95%, 120 Hp 4.5 Litre, 275 cubic inch 4 cylinder diesel engine, operating weight 22855 lbs, total GPM 20.3
$118,500
410.4 miles away - APPLETON, WI
New New Holland C345 Compact Track Loader, 2026, with NH Fecon BH074 Forestry Mulcher! 2 speed E-H controls, enclosed cab with heat, A/C and radio, heated air suspension seat, LCD display with backup camera, lap bar, turn signals, hydraulic mount plate, block heater, front electrical/multifunction, one way self leveling bucket, ride control, battery disconnect, demo door, 17.7" tracks, no bucket, 90 Hp 207.5 cubic inch 4 cylinder turbo charged diesel engine, 25.5 gallon fuel tank, 2.8 gallon DEF tank, 24.2 GPM standard flow hydraulic pump at 3450 PSI relief pressure, 39.9 high flow hydraulic pump at 3450 PSI relief pressure, 4500 lbs lift capacity
$99,995
410.4 miles away - APPLETON, WI
Used New Holland C345 Compact Track Loader, 2024, 202 hours, 2 speed E-H controls, cab with heat, A/C and radio, Demo door, heated air suspension seat, LCD display with back up camera, lap bar, turn signals, hydraulic mount plate, block heater, front electrical/multifunction, self leveling, ride control, battery disconnect, 17.7" tracks at 85%, 84" LP bucket with bolt on cutting edge, enhanced high flow with second auxiliary couplers mounted on RH boom, 35 GPM at 4000 PSI, 90 Hp 207.5 cubic inch 4 cylinder turbo charge diesel engine, 25.5 gallon fuel tank, 2.8 gallon DEF tank, 4500 lbs lift capacity, C345 has warranty until 7/23/27 or 2000 hours, with New Holland Fecon BH074SS forestry mulcher, serial number 00BH074015508, 2025, Fecon grinding technology with double carbide tools held on by 2 bolts, 76" overall width, 61" cutting width 30 to 45 GPM hydraulic requirement, weight 2850 lbs, max pressure 6000 PSI, universal skid steer mount
$39,995
410.4 miles away - APPLETON, WI
Hours: 9647
Used Hitachi EX160LC-5 Excavator, built from 1997-2006, 9647 hours, cab with heat and A/C (A/C not working), mechanical thumb, 44" pin on bucket with side cutters and 5 replaceable teeth, (one tooth missing), 27 1/2" steel tracks, track and undercarriage at 30%, operating weight 33960 lbs, 121 Hp Isuzu engine, 42 gallon fuel tank, 11.2 GPM hydraulic pump
$37,995
410.4 miles away - APPLETON, WI
HOURS: 6297
Used New Holland LB110 Tractor Backhoe, 2003 (2000-2003), 6297 hours, 4WD, Extrenda hoe, cab with heat, A/C and radio, 2 lever backhoe controls, hammer circuit, front and rear work lights, flippable pads, front and rear wiper, block heater, SMV sign, 595 lbs front counter weight, dual batteries, tilt steering, 19.5L R24 rear industrial tires at 40%, 12x16.5 front industrial tires at 15%, front tires filled with fluid, new 24" pin on backhoe bucket with 4 replaceable teeth, new 96" pin on front bucket, 108 HP 304.3 cubic inch 4 cylinder turbo charged diesel engine, 4 speeds forward and 4 speeds reverse fully synchronized transmission with torque converter and power shuttle, 42 GPM hydraulic pump, 33 gallon fuel tank
$34,995
410.4 miles away - APPLETON, WI
Hours: 1294
Used XCMG CV38PD Single Smooth Drum Vibratory Roller, 2018, 1294 hours, cab with heat and A/c, hydrostatic drive, 66" wide by 48" diameter smooth drum, beacon, MPT 485/70-24 rear tires at 70%, front and rear wiper, cummins QSF 3.8 99 Hp diesel engine
$33,995
410.4 miles away - APPLETON, WI
Fecon BH74SS branded New Holland Industry-leading, heavy steel construction, strong enough to withstand a variety of mulching conditions while continuing to perform job after job • CNH Industrial engineering approved mulching teeth • Variable 2-speed motor automatically adjusts to maximize rotor speed and torque to changing material loads • Designed with heavier materials providing more torque keeping the rotor turning when other mulchers may stall • Effectively grinds up to 8" diameter material • Standard double-tipped carbide cutting tools maximize performance and durability • Optional Samurai knife cutting tools (available separately) • Hinged motor cover provides easy service access— no tools required New New Holland Fecon Bull Hog BH074SS-CN03567 Skid Steer Mount Mulcher, 2026, perfect for New Holland C345 skid steer, Fecon grinding technology rotor with double carbide tools, held on by 2 bolts, 76" overall width, 61" cutting width, 30-45 GPM hydraulic flow requirement, weight 2850 lbs
$33,995
410.4 miles away - APPLETON, WI
Fecon BH74SS branded New Holland Industry-leading, heavy steel construction, strong enough to withstand a variety of mulching conditions while continuing to perform job after job • CNH Industrial engineering approved mulching teeth • Variable 2-speed motor automatically adjusts to maximize rotor speed and torque to changing material loads • Designed with heavier materials providing more torque keeping the rotor turning when other mulchers may stall • Effectively grinds up to 8" diameter material • Standard double-tipped carbide cutting tools maximize performance and durability • Optional Samurai knife cutting tools (available separately) • Hinged motor cover provides easy service access— no tools required New New Holland Fecon Bull Hog BH074SS-CN03567 Skid Steer Mount Mulcher, 2026, perfect for New Holland C345 skid steer, Fecon grinding technology rotor with double carbide tools, held on by 2 bolts, 76" overall width, 61" cutting width, 30-45 GPM hydraulic flow requirement, weight 2850 lbs
$33,995
410.4 miles away - APPLETON, WI
Fecon BH74SS branded New Holland Industry-leading, heavy steel construction, strong enough to withstand a variety of mulching conditions while continuing to perform job after job • CNH Industrial engineering approved mulching teeth • Variable 2-speed motor automatically adjusts to maximize rotor speed and torque to changing material loads • Designed with heavier materials providing more torque keeping the rotor turning when other mulchers may stall • Effectively grinds up to 8" diameter material • Standard double-tipped carbide cutting tools maximize performance and durability • Optional Samurai knife cutting tools (available separately) • Hinged motor cover provides easy service access— no tools required New New Holland Fecon Bull Hog BH074SS-CN03567 Skid Steer Mount Mulcher, 2026, perfect for New Holland C345 skid steer, Fecon grinding technology rotor with double carbide tools, held on by 2 bolts, 76" overall width, 61" cutting width, 30-45 GPM hydraulic flow requirement, weight 2850 lbs
$27,995
410.4 miles away - APPLETON, WI
Hours: 6158
Used Kobelc SK13LC Mark IV Excavator, 6158 hours, 1995-1998, with heat, lower front glass missing, 85 Hp Cummins engine, 27.5" steel tracks, tracks and undercarriage 35%, 26235 lbs machine, mechanical thumb, fire extinguisher, 36" bucket with 5 replaceable teeth, 24" bucket with 3 replaceable teeth
$27,995
410.4 miles away - APPLETON, WI
New Holland Fecon BH074SS forestry mulcher, serial number 00BH074015508, 2025, Fecon grinding technology with double carbide tools held on by 2 bolts, 76" overall width, 61" cutting width 30 to 45 GPM hydraulic requirement, weight 2850 lbs, max pressure 6000 PSI, universal skid steer mount
$20,995
410.4 miles away - APPLETON, WI
New New Holland Fecon RK6015-CN03567-5 Skid Steer Mount Forestry Mulcher, 2026, part number 92262424, 26 tools held on 1 bolt, 71" overall width, 60" working width, 17 to 30 GPM hydraulic requirement, weight 1465 lbs, universal skid steer mount
$19,995
410.4 miles away - APPLETON, WI
Used Fecon RK6015 FC-SS-CG2 Skid Steer Mount Forestry Mulching Head, 26 tools held on by one bolt each, 71" overall width, 60" working width, 17 to 30 GPM hydraulic requirement, weight 1465 lbs, max pressure 4000 PSI, universal skid steer mount
$13,995
410.4 miles away - APPLETON, WI
New Baumalight MS560-C510 Forestry Mulcher, 2026, part number BAU MS560C510, 60" rotor width, 75" overall width, cutting height 1.5" above ground to 1" below ground, 92 carbide tipped bolt in teeth, 15" rotor diameter, hydraulic requirement at 2490 RPM is 25 GPM, max cut capacity is 5" at 4000 PSI at 2490 PPMS, case drain required, hydraulic couplers not included, shipping weight 2115 lbs
$8,995
410.4 miles away - APPLETON, WI
New Baumalight MP360-540 60" 3 Point Mount Brush Mulcher, 2026, 55" rotor width, for 30 to 55 engine HP tractors, max PTO HP 45, 74 high speed teeth, rotor diameter to teeth tips 15", category 1 three point hitch, quick hitch compatible, 540 PTO with slip clutch, weight 1200 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and tractor HP
$8,995
410.4 miles away - APPLETON, WI
New Baumalight MP360-540 60" 3 Point Mount Brush Mulcher, 2026, 55" rotor width, for 30 to 55 engine HP tractors, max PTO HP 45, 74 high speed teeth, rotor diameter to teeth tips 15", category 1 three point hitch, quick hitch compatible, 540 PTO with slip clutch, weight 1200 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and tractor HP
$8,995
410.4 miles away - APPLETON, WI
New Baumalight MP360-540 60" 3 Point Mount Brush Mulcher, 2026, 55" rotor width, for 30 to 55 engine HP tractors, max PTO HP 45, 74 high speed teeth, rotor diameter to teeth tips 15", category 1 three point hitch, quick hitch compatible, 540 PTO with slip clutch, weight 1200 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and tractor HP
$8,995
410.4 miles away - APPLETON, WI
New Baumalight MP360-540 60" 3 Point Mount Brush Mulcher, 2026, 55" rotor width, for 30 to 55 engine HP tractors, max PTO HP 45, 74 high speed teeth, rotor diameter to teeth tips 15", category 1 three point hitch, quick hitch compatible, 540 PTO with slip clutch, weight 1200 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and tractor HP
$8,995
410.4 miles away - APPLETON, WI
New Baumalight MP360-540 60" 3 Point Mount Brush Mulcher, 2026, 55" rotor width, for 30 to 55 engine HP tractors, max PTO HP 45, 74 high speed teeth, rotor diameter to teeth tips 15", category 1 three point hitch, quick hitch compatible, 540 PTO with slip clutch, weight 1200 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and tractor HP
$7,995
410.4 miles away - APPLETON, WI
Priced in the crate/not set up New Baumalight MP348 48" Three Point Mount Brush Mulcher, 2026, 48" rotor width, 60" overall width, for 25 to 50 engine Hp, max PTO Hp 40, 60 high speed teeth, rotor diameter to tips of teeth 15", quick hitch compatible, category 1 three point hitch, 540 PTO with slip clutch, weight 1050 lbs, brush cut diameter between .5" and 5" depending on tractor transmission and Hp
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, includes 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter, bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
New Paladin Strike Force SFB750 Hydraulic Breaker, 2023, part number 237750M-0022, 2.67" diameter tool, working weight 650 lbs, impact energy class 750, 620-1150 BPM, oil flow range 11.9-21.9 GPM, universal skid steer mount, 2 moil tools, spare seal kit, adapter bracket and hoses
$4,995
410.4 miles away - APPLETON, WI
Used Orthman 225-RF Soil Mover Dirt Scraper, 6' scraper width, approximately 3 yard capacity, front dolly wheels with 7.75-H tires at 50%, 9.00-14 rear tires 80% tread but weathered, no repair welds noticed
of 4
What type of heavy construction equipment does Fastline provide?
We have a large catalog of new and used construction equipment for sale by the sellers, who we partner with.
Small Construction Equipment For Sale
Have a small scale construction project and in need of equipment to complete it? Fastline has you covered with our selection of mini excavators, skid steers, and tractor/backhoe loaders used for tasks such as lifting, digging, hauling materials, and grading.
Heavy Construction Equipment For Sale
For larger construction projects we offer heavy equipment such as bulldozers, dump trucks, wheel loaders, and cranes which are used for moving and lifting heavy objects, grading land, digging and moving materials.
Along with small and large scale construction equipment, Fastline provides many options for construction equipment attachments as well.
Filter by State
