$6,775
783.9 miles away - SALEM, SD
Used Allis Chalmers Tractor Axle - Front Wheel Assist Price includes refundable core charge of $1,000.00 The source equipment for this component: Allis Chalmers 9455 Tractor Available at Salem Tractor Parts in Salem, SD. This component has been removed from the equipment and has been cleaned and inspected. It is available for immediate shipment. Item ships via freight carrier, for a freight quote or additional information call 877-530-4010 to speak to a sales rep about this unit. Please reference number CP-4873. Applicable sales tax will be charged.
$6,500
111.6 miles away - SAINT CLAIRSVILLE, OH
Hours: 3477
Horse Power: 83
Drive Type: 2WD
Dsl, Runs good
$6,500
1700.6 miles away - BUCKEYE, AZ
Make: Allis Chalmers Stock #: 11778 Blade Size Front: 20” Blade Size Rear: 22” Spacing: 9” Lift Type: Dual Cylinder Lift Width:13’6” Tires: 95L X 15L Tires Mixed
$6,500
111.6 miles away - SAINT CLAIRSVILLE, OH
Horse Power: 70
Drive Type: 2WD
AC 6060 DSL, 64 HP. Real good runner.
$6,500
99.9 miles away - AMHERST, OH
ALLIS CHALMERS 316 flex grain head, stainless floor, poly fingers, SCH knife, nice...$6,500
$6,450
416.0 miles away - MEDIA, IL
Hours: 1372
Horse Power: 57
Drive Type: 2WD
Hours: 1372, Horse Power: 57, Drive Type: 2WD, 3-Point Hitch: Yes, New: Used, Operator Station: No Cab, PTO (RPM): 540, # of Forward Speeds: 4, # of Reverse Speeds: 4, Backhoe: Yes, Backhoe Make: MASSEY FERGUSON, Cab Air: No, Cab Heat: No, Front Fenders: No, Front Tire Type: Singles, Loader: Yes, Loader Make: ALLIS CHALMERS, Quick Hitch: No, Rear Tire Type: Singles, ROPS: No, Wheel Type: Tires
$6,250
959.0 miles away - HILLSBORO, TX
Horse Power: 71
Tractor, 3 pt, 2 remotes, 540 PTO, 18.4-15-28 tires, out of an estate, Runs & drives
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$5,995
922.3 miles away - MAXWELL, NE
Horse Power: 63
Drive Type: 2WD
Horse Power: 63, Drive Type: 2WD, New: Used, Height (inches): 81, Weight (pounds): 4659, Width (inches): 76.75
$5,995
478.1 miles away - ANTIGO, WI
Hours: 1271.4
Horse Power: 85
Drive Type: 2WD
Used Allis Chalmers D19 wide front tractor, 540 pto, 8 speed transmission, Gas engine r/15.5-38,f/f-2
$5,900
108.7 miles away - HOLGATE, OH
9 Shank Chiesel Plow, Cushion Gang Front Strait Colters, Front Blades measure 19.5", Rear Hitch, 11L15 Tires, Clevis Hitch QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$5,750
581.3 miles away - DOWNING, WI
This is a used Engine taken from a Allis Chalmers 180 Tractor but may fit additional Allis Chalmers D2800 applications. Price includes refundable core charge of $750 301.00 cubic inches Diesel engine Block Casting No. 4023035 Serial No. 71267 Available at Downing Tractor Parts in Downing, WI. This component has been removed from the equipment and has been cleaned and inspected. It is available for immediate shipment. Item ships via freight carrier, for a freight quote or additional information call 877-530-1010 to speak to a sales rep about this unit. Please reference number EN-11712. Applicable sales tax will be charged.
$5,750
581.3 miles away - DOWNING, WI
This is a used Engine taken from a Allis Chalmers 180 Tractor but may fit additional Allis Chalmers 301 applications. Price includes refundable core charge of $750 301.00 cubic inches Diesel engine Block Casting No. 4021832 Serial No. 4041809 Available at Downing Tractor Parts in Downing, WI. This component is currently still in the equipment and will need to be removed and inspected before completing as sale. Item ships via freight carrier, for a freight quote or additional information call 877-530-1010 to speak to a sales rep about this unit. Please reference number EN-12307. Applicable sales tax will be charged.
$5,750
511.0 miles away - FORT ATKINSON, IA
This is a used Engine taken from a Allis Chalmers 7050 Tractor but may fit additional Allis Chalmers D3700 applications. Price includes refundable core charge of $1,000 426.00 cubic inches Diesel engine Block Casting No. 4029727 Available at Fort Atkinson Tractor Parts in Fort Atkinson, IA. This component is currently still in the equipment and will need to be removed and inspected before completing as sale. Item ships via freight carrier, for a freight quote or additional information call 877-530-3010 to speak to a sales rep about this unit. Please reference number EN-12556. Applicable sales tax will be charged.
$5,500
416.9 miles away - BLACK CREEK, WI
Used Allis Chalmers Tractor Transmission/Rear End - Complete Rear Half Price includes refundable core charge of $1,000.00 The source equipment for this component: Allis Chalmers 5680 Tractor Available at Wisconsin Tractor Parts in Black Creek, WI. This component has been removed from the equipment and has been cleaned and inspected. It is available for immediate shipment. Item ships via freight carrier, for a freight quote or additional information call 877-530-2010 to speak to a sales rep about this unit. Please reference number CP-30564. Applicable sales tax will be charged.
$5,250
581.3 miles away - DOWNING, WI
This is a used Engine taken from a Allis Chalmers 185 Tractor but may fit additional Allis Chalmers D2800 applications. Price includes refundable core charge of $750 301.00 cubic inches Diesel engine Block Casting No. 4006955 Serial No. 99034 Available at Downing Tractor Parts in Downing, WI. This component is currently still in the equipment and will need to be removed and inspected before completing as sale. Item ships via freight carrier, for a freight quote or additional information call 877-530-1010 to speak to a sales rep about this unit. Please reference number EN-11633. Applicable sales tax will be charged.
$5,250
959.0 miles away - HILLSBORO, TX
Tractor, 2 remotes, 540 PTO, 18.4-34, has loader with hayforks, IH 2350 loader, no joystick
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$5,250
959.0 miles away - HILLSBORO, TX
Cotton stripper, 13 ft header, 18.4-26 front tires, motor turns over, needs starter
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$5,000
1700.6 miles away - BUCKEYE, AZ
Allis Chalmers 600 Pull Ripper Shank Count: 3 Shank Size: 36” Wheels: (2) Steel Gauge Hitch: Clevis Pull-Type Hydraulics: 1-valve Recommended Horsepower: 90-150+
$5,000
323.9 miles away - HOPKINSVILLE, KY
Transmission: Gear Drive
Horse Power: 44
Drive Type: 2WD
Transmission: Gear Drive, Horse Power: 44, Drive Type: 2WD, New: Used, PTO (RPM): 540, Front Tire Size: 6.00-16, Rear Tire Size: 14.9-28, Remote Hydraulics: 1
$4,750
581.3 miles away - DOWNING, WI
This is a used Engine taken from a Allis Chalmers 6060 Tractor but may fit additional Allis Chalmers 433T applications. Price includes refundable core charge of $750 433.00 cubic inches Diesel engine Block Casting No. 4008856 Serial No. 09316 Available at Downing Tractor Parts in Downing, WI. This component is currently still in the equipment and will need to be removed and inspected before completing as sale. Item ships via freight carrier, for a freight quote or additional information call 877-530-1010 to speak to a sales rep about this unit. Please reference number EN-12460. Applicable sales tax will be charged.
$4,500
714.5 miles away - SERGEANT BLF, IA
FITS BACKHOE W/ WAIN ROY QC Hours: 65
$4,500
320.9 miles away - RIDGWAY, IL
Transmission: 8 SPEED
Horse Power: 95
Drive Type: 2WD
USED 1966 ALLIS CHALMERS 190XT TRACTOR, SIX CYLINDER GAS ENGINE, NEW STARTER, 8 SPEED TRANS., 18.4-34" REAR TIRES, REAR WHEEL WEIGHTS, 2WD, (2) HYD. REAR OUTLETS, 3 POINT HITCH, 540 PTO, NEEDS BRAKE WORK, STRAIGHT DRAWBAR, NEEDS FUEL TANK CLEANED OUT, SHEET METAL STRAIGHT, FORD SHERMAN LOADER,
$4,500
744.4 miles away - WASHINGTON, KS
Horse Power: 28
Drive Type: 2WD
1952 Allis-Chalmers WD, new paint & decals, new wiring & gauges, rebuilt engine & Magneto & Radiator, new rubber on front wheels, rear tires at 50%
$4,500
99.9 miles away - AMHERST, OH
ALLIS CHALMERS A-438 corn head, excellent rolls, straight...$4,500
$4,250
959.0 miles away - HILLSBORO, TX
22' Grain Header W/Bat Reel, SN LM2261550G8585, FITS L3
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$4,250
959.0 miles away - HILLSBORO, TX
27' Grain Header W/Bat Reel
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$4,250
959.0 miles away - HILLSBORO, TX
AC Gleaner, 838N, 8row, 40in corn head, fits N series Gleaner
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$4,250
959.0 miles away - HILLSBORO, TX
8 Row Corn Head 36", fits R62 Gleaner Combine
Dealer Info
KADDATZ AUCTIONEERING & FARM EQUIPMENT SALES (HILLSBORO, TX)
HILLSBORO, TX
959.0 miles away
$4,250
581.3 miles away - DOWNING, WI
This is a used Engine taken from a Allis Chalmers 185 Tractor but may fit additional Allis Chalmers 649 applications. Price includes refundable core charge of $750 301.00 cubic inches Diesel engine Block Casting No. 4006955 Serial No. 4007441 Available at Downing Tractor Parts in Downing, WI. This component is currently still in the equipment and will need to be removed and inspected before completing as sale. Item ships via freight carrier, for a freight quote or additional information call 877-530-1010 to speak to a sales rep about this unit. Please reference number EN-11845. Applicable sales tax will be charged.
$4,200
1261.2 miles away - SHERIDAN, WY
Hours: 1061
Transmission: Synchro
Horse Power: 37
Drive Type: 2WD
Hours: 1061, Transmission: Synchro, Horse Power: 37, Drive Type: 2WD, 3-Point Hitch: Yes, New: Used, Operator Station: No Cab, PTO (RPM): 540, # of Forward Speeds: 8, # of Reverse Speeds: 1, antiquecollector: Yes, Backhoe: No, Front Fenders: No, Front Tire % Remaining: 100, Front Tire Size: 5.5-16, Front Tire Type: Singles, frontpto: No, frontthreepointhitch: No, hasfrontweights: No, haspto: Yes, hasrearweights: No, Horsepowerdrawbar (hp): 31, Loader: No, midmounthydraulics: No, midmountmower: No, midmountpto: No, PTO Size: 1 3/8, Quick Hitch: No, Rear Tire % Remaining: 50, Rear Tire Size: 13.6-26, Rear Tire Type: Singles, Remote Hydraulics: 1, ROPS: No, Turbo: No, Wheel Type: Tires
of 17
Filter by State
