Select listings to compare them
35 Listings Found
List View Grid View
View Filters

2018 HH Fabrications 72" TOOTH

Contact for Price

864.7 miles away - DES MOINES, IA
Dealer Info
VANDER HAAG'S, INC.
DES MOINES, IA
864.7 miles away

HH Fabrications Industrial Tine Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Industrial Tine Grapple - 60" and 72" standard sizes. Tines are constructed of 1 7/8” round stress shaft sleeved and pinned. Heavy duty grapples made from ½” plate steel. Two 2”x 8” hydraulic cylinders. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Includes flat faced couplers and hoses with built in orifices. Ideal for logging, demolition, brush, manure and hay. <br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Rock Bucket Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Rock Bucket Grapple - 58", 70" and 80" standard. Constructed of 1” solid plate steel with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Heavy duty grapples made from ½” plate steel. 2”x 8” hydraulic cylinder. Includes flat faced couplers and hoses with built in orifices.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Snow Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Snow Buckets - 6FT, 7FT, 8FT, 9FT and 10FT standard. <br>Constructed of ¼” plate steel with ¾” x 6” Cutting Edge (weld on or bolt on). Perforated top for volume and great visibility. ½” x 4” wear plates on bottom for extra strength. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Three to five ½” x 4” wear plates (depending on size). Step on either side for easy access.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Pallet Fork

Contact for Price

939.4 miles away - WINSTED, MN
Pallet Fork - •Forks are 1 3/8” thick x 4” wide and 48” long. Frames are 47” wide. Forks are adjustable. Slide rail forks are 1 ¼” x 47”. Heavy duty 4,000 pound capacity.<br>Reinforced heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. <br>Side step for easy access.<br> <br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Material Forks

Contact for Price

939.4 miles away - WINSTED, MN
Material Forks - Standard sizes 60", 66" and 72" and 80". Heavy duty frame. 32” Tines are sleeved and constructed of 1 ½” square stress shaft. Tines tapered for easy penetration. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. <br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications PTO Adapter

Contact for Price

939.4 miles away - WINSTED, MN
PTO Adapters - Frame constructed of ¼” 3”x 3” and ¼” 2”x 2” steel tubing. Operates off of the skid steer hydraulics. Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP off of the power take off). No need to modify power take off shafts. RPM 540. Adjustable lower arms. Reinforced heavy duty universal mounting brackets. Complete with motor, hydraulic hoses and flat faced couplers. Ideal for three point power take off equipment – snow blowers, mowers, tillers, post hole augers, etc.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Large Square Bale Spear

Contact for Price

939.4 miles away - WINSTED, MN
Large Square Bale Spear - Constructed of heavy duty 3” x 3” x ¼” steel frame. Four 32” German tempered (SHW) steel conus tines on the bottom. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models. Frame will support two bales.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Round Bale Spear (3 - Tine)

Contact for Price

939.4 miles away - WINSTED, MN
Round Bale Spear (3 - Tine) - Constructed of heavy duty 3” x 3” x ¼” steel frame. Two 24” German tempered (SHW) steel conus tines on the bottom. One 49” German tempered (SHW) steel conus tine top center. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Post Hole Auger Drive Unit & Augers

Contact for Price

939.4 miles away - WINSTED, MN
Post Hole Auger Drive Unit & Augers - •Hydraulic (orbit) drive unit – low speed / high torque (med. flow). Digs 4 ½ to 5 feet deep without extensions. Direct drive – no chains. 2” output round shaft. Reinforced heavy duty universal mounting brackets. Recommended 15 – 20 GPM.<br>Augers available in 6”, 9”, 12”, 15”, 18” and 24” (sold separately).<br><br><br><br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Material Fork Curved Tine Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Material Fork Curved Tine Grapple 60", 66", 72" and 80" standard. Heavy duty frame. 32” Tines are sleeved and constructed of 1 ½” square stress shaft. Tines tapered for easy penetration. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Single 2”x 8” hydraulic cylinder. Grapple consists of four 24” curved conus tines. Includes flat faced couplers and hoses with built in orifices.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Bucket Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Bucket Grapple - 60", 72" and 80" standard. Bucket constructed of ¼” plate steel with ¾” x 6” cutting edge. Heavy duty grapples made from ½” plate steel. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Two 2”x 8” hydraulic cylinders. <br>Half moon plasma cut end plates made from ½” plate steel. <br>Includes flat faced couplers and hoses with built in orifices.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Rock Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Rock Bucket - 58", 70" and 80" standard. <br>Constructed of 1” solid plate steel Grade 50 with plasma cut teeth in plate. Rods are 7/8” solid rod placed 3 ½” on center which gives a 2 ¾” spacing between rods. Welded to a heavy 3”x 4” x 3/8” angle iron top and bottom. Side plates are ½” plate steel. Reinforced heavy duty universal mounting brackets. Bucket constructed for many years of use. Ideal for rocks, brush and debris.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Dirt Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Dirt Bucket - 60", 66", 68", 72", 80" and 84" standard. <br>Constructed of 1/4" plate steel with 3/4" x 6” Cutting Edge weld on (bolt on options also available. 1/2" x 4” wear plates on bottom for extra strength. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.<br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Hydraulic Tree & Root Puller

Contact for Price

939.4 miles away - WINSTED, MN
Hydraulic Tree & Root Puller - 3" x 8" hydraulic cylinder and hoses. Flat faced couplers included. 3000 PSI recommended. Heavy duty frame. Reinforced heavy duty universal mounting brackets. Teeth are constructed from Grade 50 steel. Pulls 5” to 8” trees, roots and posts.<br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Root Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Root Grapple - 62", 74" and 84" standard. Constructed of 1/2" plate steel with two 1 1/2" solid shafts running through the bottom. 1/2" Gussets welded in for extra strength. Heavy duty grapples made from 1/2” plate steel. Two 2”x 8” hydraulic cylinders. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Includes flat faced couplers and hoses with built in orifices. Ideal for demolition, logging, brush, rocks, concrete, etc.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Big Ripper

Contact for Price

939.4 miles away - WINSTED, MN
Big Ripper - Includes three replaceable ripper teeth. Ripper teeth are 6” long. Reinforced heavy duty universal mounting brackets. Half moon plasma cut end plates made from ½” plate steel. Ideal for roots, stumps, trenching and boulders.<br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Backhoe

Contact for Price

939.4 miles away - WINSTED, MN
Backhoe - 20” bucket with four teeth. Grease-able heavy duty pins. Requires a minimum 65 HP. Equipped with a 3” x 16” hydraulic cylinder, hoses and couplers. Bucket wall is 1/4" plate steel; bottom is 1/2" plate steel. Digs up to 7 ½ feet deep. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. 10” bucket also available.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Round Bale Spear (2 Tine)

Contact for Price

939.4 miles away - WINSTED, MN
Round Bale Spear (2 Tine) - Constructed of heavy duty 3” x 3” x 1/4” steel frame. Two 49” German tempered (SHW) steel conus tines on the bottom. Spears are guaranteed for one year. Heavy duty universal mounting brackets. Tractor loader mounting brackets also available for most models.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Leveling Bar

Contact for Price

939.4 miles away - WINSTED, MN
Leveling Bar - Standard size 78". Constructed from two ½” x 6” hardened cutting edges (one in front and one in back of the leveling bar). Frame constructed with 2”x 4” and 2”x 2” ¼” tubing. 2 ½” 2 ½” x 3/8” angle iron is welded in the center, 1” higher than the cutting edge which allows the dirt to roll. Step is welded on for easy access. Reinforced heavy duty universal mounting brackets. Lift tabs (3/8” angles on top) are welded on frame so the attachment can be easily moved or carried with a bucket. <br>Ideal for landscaping, driveways, parking lots and concrete work. <br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Brush Devil Mower

Contact for Price

939.4 miles away - WINSTED, MN
Brush Devil Mower - 60" or 72" available with optional gauge wheel. The Brush Devil mower cuts small trees, brush and grass. Complete with heavy duty gear box. Powered by Parker motor. Torque at 3000 PSI. Requires 15 to 21 GPM.<br>Replaceable heat-treated updraft blades. Front and rear chain guards. Reinforced heavy duty universal mounting brackets. Flat Faced hydraulic couplers included. Optional gauge wheel available.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Bucket Curved Tine Grapple

Contact for Price

939.4 miles away - WINSTED, MN
Bucket Curved Tine Grapple - 60", 66", 72" and 80" standard. Bucket constructed of 1/4” plate steel with 3/4” x 6” cutting edge. Single 2”x 8” hydraulic cylinder. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength. Half moon plasma cut end plates made from ½” plate steel. Grapple consists of four 24” curved conus tines. Includes flat faced couplers and hoses with built in orifices.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Quick Hitch

Contact for Price

939.4 miles away - WINSTED, MN
Quick Hitch - Frame constructed of ¼” 2”x 2” Square Tubing. Includes two receiver tubes. Pin type drawer bar on the bottom. Tri-ball hitch in top receiver (sizes 1 7/8”, 2” and 2 5/16”). Reinforced heavy duty universal mounting brackets. Ideal for boats, 5th wheel trailers, machinery, trailers, etc. <br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Tooth Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Tooth Bucket - 60", 66", 68", 72", 80", 84" standard. <br>Constructed of 1/4” plate steel with 3/4” x 6” Cutting Edge. Heavy duty case iron adapter cover with steel tooth. 1/2” x 4” wear plates on bottom for extra strength. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications U-Blade

Contact for Price

939.4 miles away - WINSTED, MN
U-Blade - Main frame is constructed of 1/4” 2”x 2” wall tubing. Grade 50 plate steel for longer life. Universal plates 5/16” thick welded on the frame. The U-Blade is made of 1/2” thick steel and is beveled on the front and back for two way digging – forward and backward. Ideal for transplanting trees, trenching, lifting out rocks or stumps. Blade diameter measures 26 inches.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Slush Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Slush Bucket - 60", 66", 68", 72", 80", 84" standard.<br>Constructed of 1/4” plate steel with 3/4” x 6” Cutting Edge weld on (bolt on options available). 1/2” x 4” wear plates on bottom for extra strength. Bucket sides higher for increased volume. Reinforced heavy duty universal mounting brackets; gusseted top and bottom for extra strength.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Fork Mount Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Fork Mount Bucket - 72" and 96" standard. Constructed of 3/16” plate steel. Mounts forks up to 2.5” thick by 7” wide. 1/2” x 6” Cutting Edge. Includes 1" retaining pins. Works with most forklifts and telehandlers.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Concrete Bucket

Contact for Price

939.4 miles away - WINSTED, MN
Concrete Bucket - Constructed of ¼” plate steel. Heavy duty universal mounting brackets. Ideal for any mason work. <br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Tiger Claw

Contact for Price

939.4 miles away - WINSTED, MN
Tiger Claw - 84", 96" and 108" standard sizes. Bucket constructed of 1/4” plate steel with 3/4” x 6” bolt on cutting edge. Four removable curved tines constructed of 3/4” T-1 plate steel with side gussets. Reinforced heavy duty mounting brackets – various loader mounts available. Two 2 ½” x 10” hydraulic cylinders. Four to five wear plates depending on size. Hoses with sleeves for extra protection and couplers included. Grease-able pivot points. Perforated top for volume and visibility. Ideal for agricultural and heavy duty construction. Actual weight dependent on mounting brackets.<br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away

HH Fabrications Wood Splitter

Contact for Price

939.4 miles away - WINSTED, MN
Wood Splitter - •Inverted horizontal. Mount to universal skid steer. 4" x 36" hydraulic cylinder. Splitting force of 20 ton at 3000 PSI. Splits up to a 36" log. Hoses and couplers included. Heavy duty double wall construction. <br><br>
Dealer Info
HH FABRICATION
WINSTED, MN
939.4 miles away
of 2
Find new and used HH Fabrications Attachments for sale in Fastline's large database. Hundreds of HH Fabrications Attachments for sale with competitive pricing. Filter your search results with the tool to the right of the listings to find the exact make and model you need.