$585,000
1131.6 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 19” long x 60” wide long in feed conveyer, 38” tall x 56” wide Drum opening, 48” wide discharge conveyer, Magnetic end roller, Caterpillar 950HP C27 Turbo Diesel, (No emission system and does not require DEF fluid) Hydraulic reversing fans, Remote controller, 350 Gallon diesel tank, 20 Cutters/teeth on drum, 26” wide track pads, Machine total weight is 95,000lbs, Overall width: 10’ Overall Height: 12’
$365,000
1131.6 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 28” wide, Rock chain, Sectional boom, Elevating cab, Sliding offset discharge conveyor, 24” wide track pads, 275HP Cat C9 turbo diesel, Does not require Def, Machine weighs; 75,000lbs
$290,000
1131.6 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 24” wide, Rock chain, Elevating cab, Sliding offset discharge conveyor, 20” wide track pads, 275HP Cat C9 turbo diesel, Pre emissions (no def), Machine weighs; 75,000lbs
$240,000
1131.6 miles away - SAN ANTONIO, TX
RW1240W Rock saw attachment, 40” Max depth cut, 4.5” wide cut, Quad tracks, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 28,000lbs
$219,900
715.0 miles away - Brainerd, MN
2015 Vermeer FT300 1358 hours Can run carbide to chipper teeth
$219,000
633.1 miles away - SHAKOPEE, MN
RTX1250I2 1VRR1429HP1000825 940 hours 2023 model
$192,999
2001.6 miles away - MERRILL, OR
Hours: 3569
Transmission: Power Shift
Horse Power: 550
Hours: 3569, Transmission: Power Shift, Horse Power: 550, Guidance-ready: Yes, New: Used, Guidance Display: No, Guidance Receiver: No, Hydraulic Pump: Standard, Rear 3-Point Hitch: No, Track Size: 760mm/30-inch, Track Spacing: Narrow
Dealer Info
PAPE MACHINERY AGRICULTURE & TURF - MERRILL, OR
MERRILL, OR
2001.6 miles away
$190,000
1619.5 miles away - VICTOR, MT
Hours: 190
Very clean and well maintained machine with low hours and low bale count.
$185,000
1131.6 miles away - SAN ANTONIO, TX
RW1240I2 Rock saw attachment, Hydraulic side shift, Front backhoe with 18” bucket, 6 way backfill blade, 127 HP Deutz TCD3.6L Diesel Engine, Seat rotator, Creep control, Air tires, Machine weighs 23,000lbs,
$185,000
1131.6 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Foam filled tires, Machine weighs: 25,000lbs
$180,000
1131.6 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, Quad track 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 28,000lbs
$170,000
1131.6 miles away - SAN ANTONIO, TX
Hydrawheel Rock saw attachment, 46” Max depth cut, 12” wide cut, Quad track, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 27,000lbs
$162,000
1131.6 miles away - SAN ANTONIO, TX
Hydrawheel Rock saw attachment, 46” Max depth cut, 8” wide cut, Quad track 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 27,000lbs
$160,000
1131.6 miles away - SAN ANTONIO, TX
VPX1250 Vib plow attachment, Quad rubber tracks Front reel carrier, Hydraulic reel tensioner, Tracer tape reel,Cable tray on roof, Front 6-way backfill blade, 125 Cummins turbo diesel, Machine weighs: 24,000lbs
$159,900
922.3 miles away - MAXWELL, NE
$145,000
1131.6 miles away - SAN ANTONIO, TX
RW1240W Rock saw attachment, 40” Max depth cut, 10” wide cut, Standard air filled tires, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 20,000lbs
$144,900
370.1 miles away - EAST EARL, PA
conditionertype: Rubber, mountingtypelocation: Front and Rear, mowerconfiguration: Triple, New: Used, quickchangeknifesystem: Yes, Width (feet): 29.4166666666667
$142,500
692.1 miles away - REDWOOD FALLS, MN
Width of Bale: 5 Feet
Wrapping: Surface Wrap Only
Width of Bale: 5 Feet, Wrapping: Surface Wrap Only, Precut Knives: No, Pickup: Mega Wide, Bale Count: 7576, New: Used
$140,000
928.0 miles away - HOXIE, KS
Hours: 678
3.5%/36 MONTH FINANCING AVAILABLE!! LOCAL TRADE IN VERY WELL TAKEN CARE OF, NEVER BALED CORNSTALKS, ALWAYS SHEDDED, FULL SERVICE/INSPECTION DONE IN CERTIFIED SHOP, NEW PICKUP REEL INSTALLED, ALL SERVICE RECORDS AVAILABLE.
$139,700
370.1 miles away - EAST EARL, PA
dischargelocation: Rear, endgate: Yes, finespreadpan: Yes, Heapedcapacity (cubic foot): 800, hitchtype: Pull-Type, New: New, removablebeaterassembly: Yes, safetylights: Yes, Scale: Yes, spreaderconfiguration: Vertical Beaters, Suspension: Yes
$110,000
1131.6 miles away - SAN ANTONIO, TX
Center mount trencher, Set up for 8” wide X 48” deep, Rock chain with carbide teeth, Front backhoe, 6 way backfill blade, 120 Cummins turbo Diesel Engine, Seat rotator, Creep control, Air tires, Machine weighs 15,000lbs,
$105,000
1131.6 miles away - SAN ANTONIO, TX
Center mount trencher, Set up for 8” wide X 60” deep, Rock and dirt teeth, Large front weigh kit, 6 way backfill blade, 120 Cummins turbo Diesel Engine, Seat rotator, Creep control, Machine weighs 16,500lbs
$99,995
566.7 miles away - DES MOINES, IA
2025 Vermeer VX50 Vacuum Excavator Trailer 500 Gallon Spoil Tank | 1,025 CFM Vacuum | 4" Hose | 3,000 PSI Pump The 2025 Vermeer VX50 is a high-performance vacuum excavator built for utility contractors who demand productivity and reliability. Designed for production potholing and drill fluid management, it features a 49-hp Tier 4 Final Kubota diesel engine and a powerful 1,025 CFM blower, paired with a 500-gallon spoil tank for maximum jobsite efficiency. Key Features: In-tank Washdown: High-pressure spray cleans the interior while dumping to reduce cleanup time and remove stubborn debris. Three-Stage Cyclonic Filtration: Tuned vortex system extends blower and filter life, handling both wet and dry materials effectively. Cam-Over Rear Door: Creates a full 360° positive seal with no internal moving parts, making maintenance fully external. Remote Drains: Centrally located fluid drains and grease points offer convenient servicing. Auto-Belt Tensioners: Maintain proper tension automatically to extend belt life and reduce downtime. No Hassle Hose: Side-mounted hose storage eliminates the need to disconnect or coil between job sites. Get the power and features you need with the 2025 VX50. Contact Star Equipment today to get more details!
$98,000
1131.6 miles away - SAN ANTONIO, TX
Hydrawheel rock saw attachment, Saw attachment is unused, 30” max depth cut, 6” wide cut, Hydraulic side shift, Front weight kit, Front back fill blade, Machine weighs: 13,000lbs, 74HP Turbo diesel, 4 wheel steer, 4 wheel drive
$96,800
510.4 miles away - ELBERON, IA
$92,500
835.5 miles away - BARTOW, FL
24HP Kohler Diesel 580CFM VAC Pump, 500 Gln Debris Tank, 3000 PSI @ 4 GPM High Pressure Water System, (2) 100 Gallon Water Tanks, 30; 3" Suction Hose, Hyd Rear Door
$92,500
835.5 miles away - BARTOW, FL
24HP Kohler Diesel 580CFM VAC Pump, 500 Gln Debris Tank, 3000 PSI @ 4 GPM High Pressure Water System, (2) 100 Gallon Water Tanks, 30; 3" Suction Hose, Hyd Rear Door
$92,500
61.8 miles away - UPPER SANDUSKY, OH
2016 Vermeer PD10 Pile Driver - 1,242 hours. 16" Rubber Tracks. Starts, runs and operates as it should. Fleet owned and maintained. See photos for condition.
$92,500
786.3 miles away - APOPKA, FL
$92,500
106.7 miles away - SAINT CLAIRSVILLE, OH
of 33
Filter by State
