$205,000
2010.0 miles away - BURLINGTON, WA
2024 CLAAS ORBIS 750 Corn Head - #1 selling 10 row in North America! It is the all new “i6” series Orbis head! So what makes this “i6” so different and better than the old Orbis head? Totally redone and reengineered! You need to take a couple minutes and watch the video now!
$184,000
2010.0 miles away - BURLINGTON, WA
2023 CLAAS ORBIS 600 Corn Head - Head is built to last! It is the all new “i6” series Orbis head! So what makes this “i6” so different and better than the old Orbis head? Totally redone and reengineered! You need to take a couple minutes and watch the video now! Just out of the box brand new! Includes Auto Steer Wands, Auto Contour, Auto Height Control and Down Corn Drums
$179,000
2010.0 miles away - BURLINGTON, WA
2023 CLAAS ORBIS 600 Corn Head - Head is built to last! It is the all new “i6” series Orbis head! So what makes this “i6” so different and better than the old Orbis head? Totally redone and reengineered! You need to take a couple minutes and watch the video now!
$169,000
2010.0 miles away - BURLINGTON, WA
2022 CLAAS ORBIS 750 Corn Head - it is the all new “i6” series Orbis head! So what makes this “i6” so different and better than the old Orbis head? Totally redone and reengineered! You need to take a couple minutes and watch the video now! This is our demo head. Only has 15 hours.
$155,000
708.6 miles away - WILLMAR, MN
12 Rows,30 Row spacing,70% Knife life left,Rotary,Folding,Average floor condition,Plastic side shields,Comfort Cut
$151,000
1858.9 miles away - OTHELLO, WA
2021 CLAAS ORBIS 750 Corn Head - barely 2 seasons of use. Has Auto Steer Wands. Also has Auto Contour height control and side to side auto adjust. Also has down corn towers on the outside. Completely serviced, reconditioned all new knives and cleaners. This is the brand new “I6” model. Sold with a full season warranty.
$149,900
388.3 miles away - AUBURN, NY
10 ROW, AUTO CONTOUR, ROW GUIDANCE FEELERS
$149,000
250.4 miles away - BRECKENRIDGE, MI
$148,000
362.7 miles away - LEOLA, PA
2023 Claas Orbis 900 C-Flex 12 Row corn head. with hyd contour. Nice head through our shop ready to go. Mileage: 0
$146,000
2018.2 miles away - LYNDEN, WA
2022 CLAAS ORBIS 600 Corn Head - i6, 20' width. 8 rows. It has 12 demo hours and is now priced below our cost
$145,000
601.5 miles away - ALDEN, MN
10 ROW,30" SPACING,FOLDING,AUTO CONTOUR,AUTO PILOT,DOWN CORN DRUMS
$140,000
813.0 miles away - SOUTH HUTCHINSON, KS
FRESH TRADE IN. NEEDS BASIC REBUILD WOULD BE READY FOR CORN
$140,000
708.6 miles away - WILLMAR, MN
12 row,Row spacing of 30,60% knife life left,Average floor condition,Plastic side shields,Rotary,Folding,Comfort cut
$139,000
2010.0 miles away - BURLINGTON, WA
2019 CLAAS Orbis 750 Cornhead — High-Capacity Corn Harvesting at Its Best At Scholten's Equipment, we're proud to carry CLAAS equipment — and the 2019 CLAAS I6 Orbis 750 Cornhead is a great example of why CLAAS is trusted by serious forage and silage operations around the world. This purpose-built, row-independent corn header is designed to pair with the CLAAS JAGUAR forage harvester, delivering exceptional throughput, outstanding crop flow, and reliable performance from the first pass to the last. With a working width of 25 feet, 10 rows, and a transport width of under 10 feet, this header is engineered to keep up with the most demanding harvest seasons — while folding road-ready in just 15 seconds, all from the cab. Our team has conditioned this unit with over $24,000 in parts and labor. Has 75% knives. Has new trees and scrappers plus so much more. What Makes the CLAAS Orbis 750 Stand Out: Row-Independent Design — Adapts to varying row spacings without adjustments, keeping harvest moving even when rows aren't perfectly aligned. Smooth, Precise Crop Flow — Stems are always fed to the JAGUAR lengthways, ensuring consistent chop length and higher quality silage. Energy-Saving Drive — Low power requirement and low starting torque mean the header can be switched on and reversed at full load, saving real fuel costs over a long harvest season. Compact and Highly Visible — Short structure and low axle loads make maneuvering easy, even in tight headland turns. Technical Specifications: — Year: 2019 — Model: CLAAS Orbis 750 — Serial Number: I6301051 — Type: Row-independent rotary cornhead / forage header — Number of Rows: 10 rows — Working Width: 7.5 m (approximately 25 ft) — Row Spacing: 30-inch rows — Transport Width: 3.0 m (9 ft 10 in) — Folding Time: 15 seconds — Compatible Harvester: CLAAS JAGUAR forage harvester — Drive Type: Mechanical, low power requirement — Ground Adaption: Lateral contour suspension — Crop Capability: Corn (maize) and whole crop silage Ideal For: — Dairy and silage operations in Whatcom, Skagit, and throughout the Pacific Northwest needing high-capacity corn harvesting — Operations running a CLAAS JAGUAR looking for a perfectly matched, optimized cornhead — Farmers demanding consistent chop quality and minimal crop loss across varying field conditions — Anyone looking for a well-maintained used header with proven CLAAS reliability at strong value A Note on This Unit This is a 2019 used machine — carrying proven CLAAS engineering at a used purchase price. Our team can walk you through its full condition in detail. We've been transparent about what we sell since 1980, and that's not changing anytime soon. Come See It in Person Lynden Visit us online at — Where Everything Is Pictured and Priced! Contact our sales team for availability.
$125,000
636.1 miles away - NORTH MANKATO, MN
8 Row,30 row spacing,Knife life left - 70%,Rotary,Folding,Floor Cond.- Average,Plastic side shields,Comfort Cut
$120,000
1684.8 miles away - LACOMBE, AB
Please Call for Machine Availability & Location
$119,000
704.6 miles away - SAINT MARTIN, MN
12 row, 30" spacing
$119,000
1858.9 miles away - OTHELLO, WA
2020 CLAAS ORBIS 900 Corn Head - super late model. Low hours. 30' working width, 12 rows, auto steer, auto contour. $21,000 total recondition. Sold with one year warranty.
$115,000
708.6 miles away - WILLMAR, MN
12 Rows 30" Spacing,90% Knife Life Left,Rotary Crop Guide,Folding,Like New Floor Condition,Plastic Side Shields,Comfort Cut Drive
$109,000
704.6 miles away - SAINT MARTIN, MN
Folding,Rotary,Average floor condition,70% knife condition,Auto contour,12 row,30 row spacing
$109,000
708.6 miles away - WILLMAR, MN
No Rows: 12 Row Spacing: 30 Knife life left: 90% Rotary Folding Floor Cond.: Average Plastic Side Shields Comfort Cut
$109,000
548.5 miles away - EYOTA, MN
12 ROWS,30" SPACING,FOLDING STACKER,AUTO CONTOUR,AUTO PILOT,USED ON 5000 ACRES - TOTAL
$107,000
548.5 miles away - EYOTA, MN
8 ROWS,30" SPACING,FOLDING,AUTO CONTOUR,AUTO PILOT
$105,000
1730.1 miles away - WESTLOCK, AB
Please Call for Machine Availability & Location
$105,000
601.5 miles away - ALDEN, MN
10 ROW,30" SPACING,FOLDING,AUTO CONTOUR,AUTO PILOT
$105,000
362.7 miles away - LEOLA, PA
$105,000
362.7 miles away - LEOLA, PA
2021 Orbis 750 corn head. ten row with hyd contour Mileage: 0
$104,000
2010.0 miles away - BURLINGTON, WA
2017 CLAAS ORBIS 900 Corn Head - 30' working width, 12 rows, auto steer, auto contour. $20,000 recondition by our head expert! Sold with one year warranty.
$99,000
704.6 miles away - SAINT MARTIN, MN
12 ROWS ,30" SPACING ,FOLDING ,AUTO CONTOUR
$99,000
636.1 miles away - NORTH MANKATO, MN
12 ROWS ,30" SPACING ,FOLDING ,AUTO CONTOUR
of 5
Filter by State
