Click image to enlarge
2021 Barreto 30SG
$15,995.00 USD
CONTACT DEALER
DEALER INFO
STAR EQUIPMENT LTD
2950 6TH ST SW
CEDAR RAPIDS, IA 52404
DETAILS
| Price | $15,995.00 USD |
| Year | 2021 |
| Make | Barreto |
| Model | 30SG |
| Stock # | SG3029 |
| Serial # | SG3029 |
| Horse Power | 31 |
| Hours | 828 |
| New | Used |
Description
| 2021 Barreto 30-SG Track Stump Grinder DESIGN - The 30SG stump grinder features a variant of the same time-tested track drive platform used by the RTK trencher series. The 30SG has a hydraulically-driven cutter wheel that is raised and lowered into the stump and then moved from side to side to cut down. The 30SG is powered by a 31hp Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to two gear pumps: the larger gear pump drives the cutter wheel and the smaller pump works the tilt and swing cylinders. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope. CONTROLS - The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips. ROI - All hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency. FEATURES: Easy controls operate the track drive and cutter wheel. Time-tested track design absorbs impact and provides stability. Center-mounted cutter wheel provides 134º head swing. Gear pumps coupled to the engine drive the cutter wheel, tilt, and swing. Counterbalance valves on each track drive prevent motors from slipping. |
FEATURED LISTINGS
2018 Amadas ar2200
SUNSOUTH, LLC
$97,500
1994 Caterpillar 350L
DON BASKIN TRUCK SALES, LLC
$70,000
2019 Case IH STEIGER 580 QUAD
WEST PLAINS, INC.
$315,000
Rowse WR16
ROWSE HYDRAULIC RAKES CO, INC
Contact for price
2012 John Deere 4940
Dharma Initiative
$266,900
2013 Polaris P13GDGCNA P3000IE
Fake Company
Contact for price
2026 Penta 6740
DON ALLISON EQUIPMENT INC.
$69,900
2019 John Deere 735D
Kibble Equipment
$41,900
2024 John Deere 9RX 590
Sydenstricker Nobbe Partners
$649,900
2021 Land Pride AP-SSP2596
IMPORT TEST H
Contact for price
Close
The quoting activity is handled by Nationwide Transport. Data submitted through the form is sent to Nationwide Transport. Fastline is not involved in that process and any questions and/or concerns should be directed to Nationwide Transport.