Primary Contact
Will Singleton
817-673-2113
Equipment Listings
$215,000
967.6 miles away - WEATHERFORD, TX
Hours: 3800
Horse Power: 217
Hours: 3800, Horse Power: 217, A/C: Yes, AC Condition: Good, bladetypedozer: Angle, Frontbladecapacity (cubic foot): 150.12, Frontbladesize (feet): 12, Fuelcapacity (gallons): 109.6, New: Used, Operatingweight (pounds): 50706, ripper: Yes, rippertype: Multi Shank, ROPS Type: Enclosed, seatmaterial: Cloth, Turbo: Yes
$198,500
967.6 miles away - WEATHERFORD, TX
Hours: 2640
RENTAL & RPO AVAILABLE! Stock#HI0875. Check out this Nice 2020 Hitachi ZX350LC-6 Excavator! This machines comes equipped with an operating weight of 80,000 lbs, auxiliary hydraulics, a Strickland hydraulic coupler, Strickland 54" dirt bucket, good undercarriage, 13ft Stick, HT/Cold AC, Radio, and a 271 HP KHK1 Isuzu Tier 4 engine with only 2,640 HRS on the machine! This machine has received a fresh 500 HR service, been through our shop to ensure it is ready for a jobsite! Give us a call today for rental rates or about purchasing equipment online!
$210,000
967.6 miles away - WEATHERFORD, TX
Hours: 1565
Hours: 1565, A/C: Yes, AC Condition: Excellent, Articulating: Yes, Bucket: Yes, camera: Yes, Capacity (cubic yard): 4, Drive Type: 4WD, Horse Power: 191, New: Used, Operatingweight (pounds): 41115, Operator Controls: Joystick, Quick Attach: Yes, ROPS Type: Enclosed, Turbo: Yes
$215,000
967.6 miles away - WEATHERFORD, TX
Hours: 5000
Horse Power: 216
Hours: 5000, Horse Power: 216, A/C: Yes, AC Condition: Excellent, Cruisespeed (miles/hour): 8.5, Frontbladecapacity (cubic yard): 5.8, Frontbladesize (feet): 13.1666666666667, Fuelcapacity (gallons): 65, New: Used, onboarddiagnostics: Yes, Operatingweight (pounds): 57000, Operator Controls: Joystick, Padsize (inches): 30, ripper: Yes, rippertype: Multi Shank, ROPS Type: Enclosed, seatmaterial: Cloth, telematics: Yes, Turbo: Yes, undercarriagetracksystem: Long Wear
$165,000
967.6 miles away - WEATHERFORD, TX
Hours: 3725
Horse Power: 220
Hours: 3725, Horse Power: 220, A/C: Yes, AC Condition: Excellent, Cruisespeed (miles/hour): 8.5, Frontbladecapacity (cubic foot): 156.06, Frontbladesize (feet): 12.6666666666667, Fuelcapacity (gallons): 109.6, Guards: Yes, guardtype: Segmented Center, New: Used, onboarddiagnostics: Yes, Operatingweight (pounds): 46892, Operator Controls: Joystick, Padsize (inches): 24, ripper: Yes, rippertype: Multi Shank, ROPS Type: Enclosed, seatmaterial: Cloth, sweeps: Yes, telematics: Yes, Transmission: Hydro, Turbo: Yes, undercarriagetracksystem: Heavy Duty
$120,000
967.6 miles away - WEATHERFORD, TX
Hours: 5520
Hours: 5520, A/C: Yes, AC Condition: Excellent, auxiliarylighting: Yes, Bucket: Yes, Bucketsize (cubic yard): 2.6, Bucketwidth (feet): 8.5, Fuelcapacity (gallons): 86, Groundpressure (pound/square inch): 10.1, Horse Power: 194, New: Used, Operatingweight (pounds): 45178, Padsize (inches): 22, ripper: Yes, rippertype: Multi Shank, ROPS Type: Enclosed, Transmission: Hydrostatic, Turbo: Yes
$3,750
967.6 miles away - WEATHERFORD, TX
Built with the same attention to quality as the other Montana Post Driver models. The T-Rex 350E out performs other T-post drivers on the market. The Montana T-Rex Post Driver fills a role in our product line. Ideal for posts such as oil field pipe, T-posts, tent stakes, chain link posts and more. It can drive posts through moderate rocky soil. Key Features: • Energy class: 350 ft. lb. • Oil Flow (GPM): 5-10 gpm • Single Lubrication Point • Unit Weight: 200 lbs. • Working pressure: 1300-1500 psi • Blow Rate (Blows per min.): 700-1200 • Driving Cup Diameter: 43/8” Inside Diameter • Domed head eliminates need for tilt
$45,000
967.6 miles away - WEATHERFORD, TX
STK# CA2998, OROPS, Hydraulic Angle Blade, Auxiliary Hydraulics, CAT Coupler, 18" CAT Digging Bucket, Hydraulic Thumb, Strong Running 24.7 HP Caterpillar C1.7 Engine, Good Tracks, Good U/C, Regularly Serviced, 100% Work Ready, and ONLY 715 HOURS! Here is a CLEAN and WORK READY 2023 Caterpillar 303.5CR Mini Excavator! This 2023 Caterpillar 303.5CR feature OROPS, Hydraulic Angle Blade, Hydraulic Thumb, Auxiliary Hydraulics, CAT Coupler, 18" Digging Bucket, Strong Running 24.7 HP Caterpillar C1.7 Engine, Good Tracks, Good U/C, and ONLY 715 HOURS! Everything on this 2023 Caterpillar 303.5CR is tight, clean, and ready for the jobsite. LSR has just given everything a fresh service to ensure you could unload straight onto the jobsite! Don't Miss Out! Delivery Could Be As Early As Today! Give us a call with any questions or concerns that you may have about purchasing equipment on-line.
$375,000
967.6 miles away - WEATHERFORD, TX
Hours: 2885
Horse Power: 354
STK# KO0364. RENTAL & RPO AVAILABLE! EROPS, Heat/AC, AM/FM Radio, Komatsu 3 Shank Ripper, 15.6 CU YD Komatsu Sigma Blade, Good U/C, New End Bits, Strong Running 354 HP Komatsu SAA6D140E-7 engine, and ONLY 2,885 HOURS! Here is a CLEAN and ALL ORIGINAL 2019 Komatsu D155AX-8 Dozer! This Komatsu D155AX-8 Dozer features EROPS, Heat/AC, AM/FM Radio, Komatsu 3 Shank Ripper, 15.6 CU YD Komatsu Sigma Blade, Good U/C, New End Bits, Strong Running 354 HP Komatsu SAA6D140E-7 engine, and ONLY 2,885 HOURS! Everything on this Komatsu D155AX-8 is READY FOR THE JOBSITE! Please review the attached KOMTRAX and KOMATSU CARE REPORTS. Don't Miss Out! Delivery Could Be As Early As Today! Give us a call with any questions or concerns you may have about purchasing equipment online.
$3,950
967.6 miles away - WEATHERFORD, TX
NEW 78" CID XTREME DUTY Brush Grapples! Multiple To Choose From! Will fit ANY MAKE and MODEL SKID STEER!! The X-treme Root Grapple is the grapple of choice for those who need an attachment that will hold up in severe applications. It can handle more material and is more rugged than our other grapples. It is built from 5/8″ thick steel plate on the top, 1/2″ on bottom, and incorporates 4″ square tubing. It also features enclosed hydraulic cylinders and shafts. It was built in mind for the big skid steer loaders and compact track loaders that are 65 hp and up. The CID xtreme root grapple can handle pretty much anything you want to go up against. The rod and cylinder covers come standard on the x-treme root grapple and are diamond plated and gives it the look it so deserves, which is “Tough”. This root grapple can pick up heavy logs, and big amounts of debris material without hesitation. It is the one to have for big storm cleanups and natural disasters. You can rest assure that the CID X-treme Duty root grapple will last for many years to come.
$165,000
967.6 miles away - WEATHERFORD, TX
Hours: 1840
Horse Power: 104
Hours: 1840, Horse Power: 104, A/C: Yes, AC Condition: Excellent, Cruisespeed (miles/hour): 5.6, Frontbladecapacity (cubic foot): 77.22, Frontbladesize (inches): 109.5, Fuelcapacity (gallons): 51.5, idlerspercentremaining: 100, New: Used, onboarddiagnostics: Yes, Operatingweight (pounds): 20534, Operator Controls: Joystick, padpercentremaining: 100, Padsize (inches): 20, ripper: Yes, rippertype: Multi Shank, rollerspercentremaining: 100, ROPS Type: Enclosed, screens: Yes, seatmaterial: Cloth, sprocketspercentremaining: 100, sweeps: Yes, Transmission: Hydro, Turbo: Yes, undercarriagetracksystem: SALT
$75,000
967.6 miles away - WEATHERFORD, TX
Hours: 2180
Horse Power: 98
Hours: 2180, Horse Power: 98, Fuel Type: Diesel, A/C: Yes, AC Condition: Excellent, Bucket: Yes, camera: Yes, Capacity (pounds): 4970, Fuelcapacity (gallons): 31.7, New: Used, Operatingweight (pounds): 11464, premiumdisplaypanel: Yes, Quick Attach: Yes, ROPS Type: Enclosed, seatmaterial: Cloth, Tracksize (inches): 18, Turbo: Yes
Equipment Types
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|
Show More