Wakarusa Ag LLC is a family-owned company operating out of Wakarusa Indiana. We started selling Penta Mixers in 2001 and have become the leader in mixer sales in the tri-state area. Since opening Wakarusa Ag, we now offer Honey Bee Flex Draper Heads, Deutz-Fahr and TYM Tractors, Wacker Neuson Skid Loaders, Scag and Bad Boy mowers, Echo Power tools and more.
Read MorePrimary Contact
Equipment Listings
$15,299
190.8 miles away - WAKARUSA, IN
1,000-gallon trailer sprayer Frame / Construction: Heavy-duty powder coated steel frame and components Engine: Pacer 5.5 HP Honda engine Pump: 2 in. ports (200 gpm w/Honda GX160) Dimensions: 88 inches wide, 200 inches long (tongue to tail), 80 inches high Weight: Approximately 4,000 lbs (dry weight)
Contact for Price
190.8 miles away - WAKARUSA, IN
Transmission: Hydro
Horse Power: 45
Drive Type: 4WD
$69,900
190.8 miles away - WAKARUSA, IN
Transmission: Powershift
Horse Power: 155
Drive Type: MFWD
Transmission: Powershift, Horse Power: 155, Drive Type: MFWD, New: Used, Operator Station: Cab, # of Forward Speeds: 24, # of Reverse Speeds: 24, Cab Air: Yes, Cab Heat: Yes, Loader: No, loaderready: No
Contact for Price
190.8 miles away - WAKARUSA, IN
J&M 1112-20S X-Tended Reach Cart w/20" Auger, SD 6" V-Truss Axle 4 1/2" Spin Roll Tarp complete with frame and crank for 1010, 1000, 1050, 1110, and 1150 Gra Installation of Roll Tarp
$13,900
190.8 miles away - WAKARUSA, IN
15 Shank chisel plow, front straight disc/w hydraulic lift cylinders, everything works fine and discs are in good condition. two shanks have been removed but will come with the unit. spike drags in the back. 18' feet working width. Heavy welded frame construction designed for durability.
$69,210
190.8 miles away - WAKARUSA, IN
30' 10" Rear Disc Mower Roller Conditioner
$36,900
190.8 miles away - WAKARUSA, IN
Horse Power: 35
Drive Type: 4WD
$64,499
190.8 miles away - WAKARUSA, IN
Spec Value Capacity 540 cu. ft. Width 100 in Height 90 in front door and rear commodity door. Dual discharge flat conveyor. Double augers (twin screws): The 5540 model uses two augers to improve mixing action and throughput. Hurricane auger design: The augers have a “Hurricane” style that includes cutouts to allow material recirculation and better mixing. Tub & floor construction: The mixing tub is built with heavy wear-resistant steel (high abrasion, acid resistant) and straight walls to reduce compaction. Gearbox / drive system: Power is transmitted via a PTO (Power Take-Off) through a gearbox; Penta uses planetary gearboxes (for twin or triple auger models) and offers optional torque limiters or shear bolt protection. Frame & structural steel: The frame is built from solid steel (½″, ¾″ North American steel) rather than hollow tubing to increase durability and reduce condensation issues.
$10,900
190.8 miles away - WAKARUSA, IN
Tedder 4 Basket trailed 17' 5" - DEMO UNIT
Contact for Price
190.8 miles away - WAKARUSA, IN
10′ tub flare (i.e. 10' width at flare),Tub floor built of 10 gauge, side walls of 12 gauge steel,44″ (111.76 cm) heavy-duty hammermill located at rear of tub It uses 64 hammers, mounted on 1¼″ (3.18 cm) case-hardened rods, and 3/8″ thick rotor plates 8-belt drive system, spring-tensioned (to maintain constant tension as belts wear & stretch The drive is via PTO (1,000 rpm), through multiple belts, using either a 1-3/8″ × 21-spline or 1-3/4″ × 20-spline shaft ub drive is via hydraulic motor, with a continuous toothed chain gear around tub, tensioned by dual spring tensioners Bolt-in mill grate / slug bar combination; operator can adjust the number of grate/slug bars depending on grinding conditions Screen options from 1/8″, 3/16″, ¼″ up to larger hole sizes (up to 8″) to control output particle size Dual augers (12″ diameter × 4′ length) move ground material to the discharge / stacking conveyor Hydraulic folding, stacking conveyor: 21′ long × 24″ wide, capable of stacking to ~14′-9″ height at a 40° incline Requires a minimum of 150 HP, up to 315 HP on PTO Hydraulic output required: ~ 8 gpm at 1,500 psi (for conveyor & tub tilt / fold circuits) EXTRA SCREENS INCLUDED.
$67,900
190.8 miles away - WAKARUSA, IN
Penta 6040 twin screw 600 cu. ft mixer, right side 3' flip up conveyor. The 6040 uses Penta’s patented Hurricane augers, which have cutouts that allow material to drop through, promoting better circulation, faster mixing, and more uniform blends. The augers are engineered for durability — using robust steel, welded construction, and optimized geometry to reduce stress and wear. The mixing tub is designed with straight walls and wear-resistant steel to avoid buildup and compaction, supporting efficient mixing and easier cleanout. The mixer requires a PTO from a tractor of at least 90 HP. The drive is designed to handle high torque and the stress of mixing heavy rations.
$75,900
190.8 miles away - WAKARUSA, IN
10′ tub flare (i.e. 10' width at flare),Tub floor built of 10 gauge, side walls of 12 gauge steel,44″ (111.76 cm) heavy-duty hammermill located at rear of tub It uses 64 hammers, mounted on 1¼″ (3.18 cm) case-hardened rods, and 3/8″ thick rotor plates 8-belt drive system, spring-tensioned (to maintain constant tension as belts wear & stretch The drive is via PTO (1,000 rpm), through multiple belts, using either a 1-3/8″ × 21-spline or 1-3/4″ × 20-spline shaft ub drive is via hydraulic motor, with a continuous toothed chain gear around tub, tensioned by dual spring tensioners Bolt-in mill grate / slug bar combination; operator can adjust the number of grate/slug bars depending on grinding conditions Screen options from 1/8″, 3/16″, ¼″ up to larger hole sizes (up to 8″) to control output particle size Dual augers (12″ diameter × 4′ length) move ground material to the discharge / stacking conveyor Hydraulic folding, stacking conveyor: 21′ long × 24″ wide, capable of stacking to ~14′-9″ height at a 40° incline Requires a minimum of 150 HP, up to 315 HP on PTO Hydraulic output required: ~ 8 gpm at 1,500 psi (for conveyor & tub tilt / fold circuits) EXTRA SCREENS INCLUDED.
Equipment Brands
| Manufacturer | Sell Equipment | Sell Parts | Service Center | Authorized Facility |
|---|
Show More