$19,000
92.3 miles away - WELLINGTON, OH
$17,500
88.3 miles away - SMITHVILLE, OH
20', tracker, excellent, 2006 year
$16,900
108.7 miles away - HOLGATE, OH
FULL FINGER AUGER, VERY NICE HEADER, 30' flex head, CIH narrow throat multi point hooukps, PTO drive shaft, double drive, 3" knife, safety lights, QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$16,000
88.3 miles away - SMITHVILLE, OH
20', field tracker sensors, off low hour 2344
$14,900
94.2 miles away - DELPHOS, OH
2005 CIH 1020, grain head, 30' width, fore & aft, field tracker compatible, 3" knife in great shape, very clean late model head, always stored inside....$14,900
$14,500
47.5 miles away - BELLVILLE, OH
2006 CIH 1020 30', spare cutterbar, hydraulic fore/aft, good auger, header cart included, nice and ready to work! Call or email for more information.
$14,000
92.3 miles away - WELLINGTON, OH
Not Your Average Grain Head. This 30-foot Case IH 1020 is a well-above-average head with a history of major reconditioning and continued upkeep. In 2023, nearly $22,000 in parts was invested in a major reconditioning work order. That work included a reman wobble box, new 30-foot cutterbar, complete new knife assembly, guards, runner supports, skid shoe poly, AHHC sensing pads, auger support and timing components, auger drive and idler sprockets, main drive chain, reel drive support, bearings, bushings, and numerous other components. The head has been harvested with in 2024 and 2025 since that work was completed, so these components are not being represented as new, but the extent of that work adds significant value to this head. Today, the knife and guards remain serviceable at approximately 50% wear. The center floor section has been recently replaced, the outer floor sections are in very good shape, and the poly floor liner under the auger looks very good. The auger flighting appears straight and it has updated poly fingers in the auger. Reel bats and teeth are straight and uncut, while the reel bushings show only minor wear. This head is equipped with automatic header height control, Field Tracker, and a single-point hydraulic connection. Both crop dividers are included; the right divider has some bent sheet metal that appears repairable. One cutterbar lockup was accidentally left engaged for the photos, which makes the cutterbar appear uneven, but this is not an indication that the cutterbar itself is bent. Overall, this is an unusually well-kept 1020 that appears ready for many more acres. With routine greasing, it should be ready to go to the field. Contact us to get a quote, explore financing options, or discuss your trade!
$10,500
88.3 miles away - SMITHVILLE, OH
30'
$10,000
99.9 miles away - AMHERST, OH
Case IH 17 1/2 hydraulic fore and aft, 3" sections, nice...$10,000
$9,900
47.5 miles away - BELLVILLE, OH
Case IH 1020 CIH 16.5 ft, pipe reel, all new guides in auger fingers, hydraulic fore/aft, this head is nice!! Call or email for more information.
$9,500
98.6 miles away - FORT RECOVERY, OH
Case IH 1020-25' grain head, Stock #12740, flighting extensions, Johnson rock guard, like new SCH cutter bar, hydraulic fore & aft.
$9,500
88.3 miles away - SMITHVILLE, OH
FULL FINGER AUGER,25'
$9,500
94.2 miles away - DELPHOS, OH
$8,500
108.7 miles away - HOLGATE, OH
25' Flex head, CIH narrow throat multi point hookups, PTO drive shaft, 3" SCH knife, hydraulic fore and aft reel, end dividers, HEAD CART IN PICTURES IS NOT INCLUDED QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$8,500
99.9 miles away - AMHERST, OH
$8,500
119.8 miles away - NAPOLEON, OH
Case IH 1020 30' Grain Table, Includes Crop Dividers as Pictured, Hydraulic Reel...$8,500 (header cart not included) Buy the 1020 head and the pictured header cart for $10,000!
$8,500
88.3 miles away - SMITHVILLE, OH
15' , oil bath wobble. 2 PTO, 3" Carry knife
$8,300
99.9 miles away - AMHERST, OH
$8,250
94.2 miles away - DELPHOS, OH
1997 CIH 1020, 25’ header, poly skid shoes, field tracker, hydraulic fore and aft reel, 3” knife...$8,250
$8,000
99.9 miles away - AMHERST, OH
Case IH 1020 15' flex head, oil bath, dual drive, hydraulic fore and aft, pipe reel...$8,000
$7,900
108.7 miles away - HOLGATE, OH
30' Flex head, CIH, narrow throat hookups, PTO drive shaft, hydraulic fore and aft reel, QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$7,800
99.9 miles away - AMHERST, OH
17 1/2" 3" Crary knife...$7,800
$7,800
99.9 miles away - AMHERST, OH
$7,500
75.5 miles away - COVINGTON, OH
Platform Size: 25
CASEIH 1020-25' FLEX GRAIN HEAD JOHNSON GRAIN SAVER,3" CASE KNIFE,POLY SKID PLATES
$7,500
126.7 miles away - LISBON, OH
Gathering Type: Auger, Hydraulic Hookup: SinglePoint, New: Used, polyskidshoes: Yes, Width (feet): 25
$7,500
88.3 miles away - SMITHVILLE, OH
25' 2 PTO, OIL BATH, FIELD TRACKER SENSORS
$7,500
88.3 miles away - SMITHVILLE, OH
30', FIELD TRACKER SENSORS
$7,300
99.9 miles away - AMHERST, OH
Case Ih 17 1/2' head, quick cut knife, manual fore and aft...$7,300
$7,000
88.3 miles away - SMITHVILLE, OH
20', dual pto , dry wobble, fore /aft
$6,900
98.6 miles away - FORT RECOVERY, OH
Case IH 1020-25' grain head, Stock #13197A, hydraulic fore & aft adjustment, auger flighting extensions, SCH cutterbar, dual PTO drives.
of 2
Filter by State
OHIO
