$28,000
1039.7 miles away - ELKHART, KS
MY10 5310--16R20 strip-till. Raven super cooler, Montag 16 A6 6 ton dry box.
$22,500
769.7 miles away - YANKTON, SD
depthcontrol: Yes, depthcontroltype: Manual, frametypefieldcultivators: 3-Section Folding, gaugewheeltype: Fixed, harrowtype: 3-Bar Coil Tine, hitch: No, hitchtype: Pull-Type, hitchtypefieldcultivators: Level Lift, lowtransportconfiguration: No, narrowtransportconfiguration: No, New: Used, safetylights: Yes, Shank Type: C-Shank, Shankspacing (inches): 6, singlepointdepthcontrol: Yes, Sweepsize (inches): 7, sweeptype: Knock-On, Width (feet): 37
$21,500
375.0 miles away - ANNAWAN, IL
Frontbladesize (inches): 19, hitch: No, hitchtype: Pull-Type, mudscrapers: Yes, New: Used, Rearbladesize (inches): 20, Walking Tandems: Yes, Width (feet): 12
$19,900
578.9 miles away - MADRID, IA
DMI Tigermate 11, 44' newer 7" nickels bolt on sweeps, good 3 bar harrow, good tires & tight field cultivator.
$19,900
697.8 miles away - WESTBROOK, MN
$19,900
578.9 miles away - MADRID, IA
DMI Tiger-Mate II, 42-44', no cracks or welds, always shedded, newer sweeps, good 4 bar tine harrow, 320-70-15 steel belted radial highway tires, delivery available.
$19,500
2057.7 miles away - Woodland, CA
Hydraulic Pipe Bender, 6 inch to 20 inch capability, no dies, duetz diesel, towable, rubber tires, $19,500
$19,500
548.5 miles away - EYOTA, MN
gaugewheeltype: Fixed, harrowtype: 4-Bar Coil Tine, hitchtypefieldcultivators: Level Lift, New: Used, Width (feet): 55
$18,900
380.2 miles away - BELLEVILLE, IL
Size: 44 ft
Kind: 5-Section Folding
Standards: C-Shank
44' field cultivator with 3-bar coil tine harrow and rear hitch. Always sheded.
$17,500
108.7 miles away - HOLGATE, OH
7 shank disk ripper, 30" ripper spacing, spring reset, pull type hitch, 21" rolling coulters, guage wheels, safety lights, QUICK & EASY ONSITE LOW FIXED RATE FINANCING AVAILABLE. TRUCKING AVAILABLE ANYWHERE. IF YOU ARE PLANNING A TRIP TO LOOK AT A PIECE OF EQUIPMENT, PLEASE CALL FIRST TO CONFIRM THAT IT IS ON THE LOT AND STILL AVAILABLE
$17,500
99.9 miles away - AMHERST, OH
DMI Tigermate II 24', 5 bar spike, rear hitch, new 7" Ultra wings and shank protectors, walking tandems, gauge wheels, TIGHT...$17,500
$15,900
683.0 miles away - SAINT CLOUD, MN
50.5',Double fold,Non-pivot,Bolt-on,7.5" sweep,3-bar coil,Dual hitch clevis/tongue
$15,850
526.0 miles away - THORP, WI
frametypefieldcultivators: 5-Section Folding, harrowtype: 3-Bar Coil Tine, hitchtype: Pull-Type, New: Used, Shank Type: C-Shank, Walking Tandems: Yes, walkingtandemswings: Yes, Width (feet): 42
$15,500
138.6 miles away - WILKINSON, IN
DMI 3250 3pt tool bar, 13 knife, comes with controller, always shedded, item is not on site, Call Mike before coming to look !
$15,000
380.2 miles away - BELLEVILLE, IL
7 shank inline ripper with 7" points, pull type hitch, and gauge wheels.
$14,950
665.2 miles away - HIAWATHA, KS
$14,900
440.5 miles away - MORNING SUN, IA
frametypefieldcultivators: 3-Section Folding, harrowtype: 4-Bar Coil Tine, New: Used, Width (feet): 30.5
$14,900
688.2 miles away - LITCHFIELD, MN
44 1/2 FT VERY CLEAN GOOD HARROW TEETH REPLACED LAST YEAR
$14,900
379.9 miles away - KEWANEE, IL
Used DMI 5310 16 Knife NH3 Applicator, Dual Hiniker Coolers, Spring Shanks on Coulters and Knives, Yetter Notched Disc Sealers with New Sealer Blades Included, Walking Tandem Axles on Main Frame and Wings, Coulters Measure 22”, No Monitor.
$14,900
379.9 miles away - KEWANEE, IL
Used DMI 5310 16 Knife NH3 Applicator, Dual Hiniker Coolers, Spring Shanks on Coulters and Knives, Yetter Notched Disc Sealers with New Sealer Blades Included, Walking Tandem Axles on Main Frame and Wings, Coulters Measure 22”, No Monitor.
$14,500
239.2 miles away - SANDUSKY, MI
7 Shank, Spring Trip
$14,500
99.9 miles away - AMHERST, OH
DMI ECOLO-CHAMP 1300 11 shank, 6 parabolic shanks and 5 chisel shanks with 4" twisted, hydraulic gangs, new steel, Excellent!...$14,500
$14,500
487.8 miles away - WAUSAU, WI
Used DMI Tigermate II, 20' field cultivator, 40 spring loaded C-shanks, 5-bar spike harrows, depth control indicator, hydraulic cylinder, hoses and couplers, walking tandems on mainframe and outer wings, 9.5L15 mainframe tires, 5.00-15 wing tires.
$14,495
507.4 miles away - ABBOTSFORD, WI
$14,000
623.1 miles away - BANCROFT, IA
44', PAINT #5, 3-BAR HARROW, NON-PIVOT, STAB WHEELS, MORE INFO COMING
$13,950
669.8 miles away - SLEEPY EYE, MN
Size: 36 ft
Kind: 3-Section Folding
Standards: C-Shank
Field Cultivator/3-Section/Level Lift/Mechanical depth control/C-Shank/6 Inch/3 Bar Coil Tine/No Basket/No Rear Hitch
$13,900
372.9 miles away - HAMEL, IL
9 SHANK, 30" SPACING, 22" F / 21.75" R, 10" POINTS, SHEAR BOLT SHANKS, DISK LEVELER W/ 3 BAR SPIKE
$13,900
291.6 miles away - ALBION, IL
$13,500
479.6 miles away - SHELBINA, MO
depthcontrol: Yes, frametypefieldcultivators: 3-Section Folding, harrowtype: 5-Bar Spike / Drag, hitchtype: Pull-Type, hitchtypefieldcultivators: Level Lift, New: Used, Width (feet): 24
$13,000
86.9 miles away - ROSSBURG, OH
frametypefieldcultivators: 5-Section Folding, harrowtype: 3-Bar Coil Tine, New: Used, Width (feet): 44
of 5
Filter by State
