$595,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 8300
14’5” (4.4) HD reach stick 27'7" (8.4M) GP Boom 31’ 9” max dig depth, Bucket linkage with lifting eye, 84” bucket 207,000lbs 35” double grouser track shoes/pads, Hyd counterweight removal option 34,000lb counterweight, Side and rear camera, Auto greaser, 542HP Cat C18 turbo diesel, 322 Gallon diesel tank, with Hydraulic quick coupler
$595,000
1131.6 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 800HP Caterpillar C18 Turbo Diesel, 57.5" wide x 44" high drum opening, 42” wide discharge conveyor, 11HP onboard air compressor, 300 Fuel tank, Approximant machine weight: 72,000lbs, 8’ 6” wide, Remote controller,
$585,000
1131.6 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 19” long x 60” wide long in feed conveyer, 38” tall x 56” wide Drum opening, 48” wide discharge conveyer, Magnetic end roller, Caterpillar 950HP C27 Turbo Diesel, (No emission system and does not require DEF fluid) Hydraulic reversing fans, Remote controller, 350 Gallon diesel tank, 20 Cutters/teeth on drum, 26” wide track pads, Machine total weight is 95,000lbs, Overall width: 10’ Overall Height: 12’
$395,000
1131.6 miles away - SAN ANTONIO, TX
Horizontal grinder on tracks, 60" W x 37" H Drum opening, 54” wide discharge conveyor, Caterpillar C18 750HP Turbo Diesel, (Does not require DEF fluid), Hydraulic reversing fans, 11HP onboard Honda 175PSI Compressor, Onboard Honda water/trash pump, 300 Fuel tank, Approximant machine weight: 80,000lbs, Remote controller,
$390,000
1131.6 miles away - SAN ANTONIO, TX
Cab with AC and heat, Scraper Capacity - Heaped: 24.0yd³, 407 HP Cat C13, Top speed: 33 MPH, Fuel Tank: 216.1gal , Air ride seat, 33.25R29 tires, Overall Width: 11.75’, Machine weight: 80,000lbs
$365,000
1131.6 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 28” wide, Rock chain, Sectional boom, Elevating cab, Sliding offset discharge conveyor, 24” wide track pads, 275HP Cat C9 turbo diesel, Does not require Def, Machine weighs; 75,000lbs
$295,000
1131.6 miles away - SAN ANTONIO, TX
Mounted on 2017 Cat 320FL, With rear mounted SK350PP auxiliary power pack, 370HP Cat C9.3 turbo diesel, Aux Attachment pump: 150 CC closed loop, Aux max flow: 105 GPM, Aux max pressure: 5500 PSI, Aux Fuel tank: 150 gal, 56” wide Fecon mulcher, 27 knives, Backup Camera, Machine overall width: 10’ 5”, 31” wide track pads, Machine weighs: 58,000lbs
$290,000
1131.6 miles away - SAN ANTONIO, TX
Set up to cut 8’ deep X 24” wide, Rock chain, Elevating cab, Sliding offset discharge conveyor, 20” wide track pads, 275HP Cat C9 turbo diesel, Pre emissions (no def), Machine weighs; 75,000lbs
$285,000
1131.6 miles away - SAN ANTONIO, TX
4,500 Gallon Niece Water Tank, Two Rear Sprayers Left and right side Sprayers Rear gravity dump pipe/dispenser, Joystick Controlled Top Mounted Water Cannon Rear hose real, 314HP Cummins 6.7 turbo diesel, Auto trans with 6 forward and 3 reverse gears, 31mph Max Travel Speed 79 Gal fuel tank 800/45-30.5 flotation Tires 10’5” wide 12’ 3” tall Machine weight empty: 41,500lbs
$245,000
1131.6 miles away - SAN ANTONIO, TX
hours: 5100
14’ MB,6 wheel drive Pilot controls, John Deere smart grade, Rear ripper and scarifier,Front push block, Back up camera, Heated seat 275HP Turbo Diesel, Machine weights: 46,000lbs, 17.5R25 tires, 8 speed forward and 8 speed reverse, Enclosed cab with A/C and heat,
$245,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 5900
31Ton Cap, With tailgate, 23.9Yd heaped Cap, Backup camera, Powered mirrors, 320HP John Deere Turbo Diesel,130 Gallon fuel tank,23.5-R25 Tires, Machine empty weight: 50,000lbs, Machine width, 9’5”
$240,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 1850
Cab with A/C and heat, 10’ 8” wide semi u blade, 5 pocket Vail ripper with 3 shanks, 205HP Turbo Diesel, Machine weighs: 50,000lbs, 23.5” wide track pads, 94 Gallon fuel tank,
$240,000
1131.6 miles away - SAN ANTONIO, TX
RW1240W Rock saw attachment, 40” Max depth cut, 4.5” wide cut, Quad tracks, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Large front weight kit, Machine weighs: 28,000lbs
$230,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 5250
8.0 Yd GP bucket 11’2” wide, On board scale, Auto grease, Back up camera, Steer wheel or Joystick steering , Ride control, Power and heated mirrors, AC and heated air ride seat, Extra factory work light kit, 29.5R25 tires, 375HP Volvo D13J, 96 Gallon fuel tank, Extra rear weight kit, Machine weighs: 73,000lbs
$220,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 6800
46 Ton Cap, 26.9Yd Struck Cap, 33 yds heaped cap, 481HP John Deere 13.5L Turbo Diesel, 29.5-R25 Tires, 160 Gallon fuel tank, Machine empty weight: 72,000lbs
$220,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 4000
Cab with AC and heat, JRB 418 quick coupler, Auxiliary hydraulics 3rd valve, Ride control / boom suspension, Backup camera, Priced with 4.75 yard GP bucket, 120” wide bucket, 249HP Turbo Diesel, 92 Gallon diesel tank, Machine weight: 42,000lbs, Forks available for additional cost,
$220,000
1131.6 miles away - SAN ANTONIO, TX
2,500 Gallon Niece Water Tank, Two Rear Sprayers, Left and right side Sprayers, Rear gravity dump pipe/dispenser, Left and right side Sprayers, Joystick Controlled Top Mounted Water Cannon, Rear hose real, 130HP Cummins 4.5 turbo diesel, Auto trans with 6 forward and 3 reverse gears, 24mph Max Travel Speed, 36 Gal fuel tank, 800/45-30.5 flotation Tires, 9’7” wide, 10’ 6” tall, Machine weight empty: 21,500lbs
$215,000
1131.6 miles away - SAN ANTONIO, TX
FAE mulcher attachment, 87” wide cutting width, Carbide teeth Hydraulic front mulcher door and hyd push bar, Rear-View Camera, New complete engine installed at 3950 hours, 320 HP (239 kW) Cummins QSL9,High capacity auto reversing fan, Hydrostatic drive combined with two-speed transfer case, Attachment Pump: 100 GPM (378 LPM) @ 5,000 PSI (33,095 kPa) 127 gal. (481 L) Diesel tank, 12MPH max travel speed, Tire size: 28L - 26 Machine overall width: 9’ Machine height: 10’ 10”, Machine weighs: 39,000lbs
$210,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 7800
13'9" (4.2 M) Stick/Arm length 30’ max dig depth 84" bucket Counterweight removal system Air ride / heated seat, Rear view camera, 36” Double grouser track pads, Plumbed for hydraulic quick coupler (does not have Q/C), 463 hp Isuzu 15.7L Turbo diesel, 238 Gallon fuel tank, Machine with bucket weighs: 157,000lbs Machine width: 13’9”
$199,000
1131.6 miles away - SAN ANTONIO, TX
hours: 3400
14’ MB, 6 wheel drive Topcon system installed, (no receivers included) Rear ripper and scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,400lbs, 17.5R25 tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat,
$195,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 5700
Cab with AC and heat, JRB 418 quick coupler, Ride control / boom suspension, Backup camera, 4.75 yard GP bucket, 120” wide bucket, 249HP Turbo Diesel, 92 Gallon diesel tank, Machine weight: 42,000lbs, Forks available for additional cost,
$185,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 1100
Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension, 3 yard GP bucket, 100” wide bucket, 174HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 31,500lbs, 350 hours, Forks available for additional cost,
$185,000
1131.6 miles away - SAN ANTONIO, TX
RW1240I2 Rock saw attachment, Hydraulic side shift, Front backhoe with 18” bucket, 6 way backfill blade, 127 HP Deutz TCD3.6L Diesel Engine, Seat rotator, Creep control, Air tires, Machine weighs 23,000lbs,
$185,000
1131.6 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Foam filled tires, Machine weighs: 25,000lbs
$180,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 4150
Cab with AC and heat, Fusion quick coupler, Joystick steering, Ride control / boom suspension, Backup camera, Powered and heated mirrors, 4.75 yard GP bucket, 115” wide bucket, 249HP Turbo Diesel, 68 Gallon diesel tank, 23.5R25 Firestone Versabuilt Radials Machine weight: 42,500lbs, Forks available for additional cost,
$180,000
1131.6 miles away - SAN ANTONIO, TX
Vermeer RW1252 Rock saw attachment, 52” Max depth cut, 7” wide cut, Quad track 125 HP Cummins turbo diesel, Front 6 way blade, Seat rotator, Creep control, Larger front weight kit, Machine weighs: 28,000lbs
$179,000
1131.6 miles away - SAN ANTONIO, TX
Cab with A/C and Heat, Cut width: 100", Max Cut Depth: 16", 450HP Cummins® QSX-15. Travel speed: 0-6 mph, High-flotation 620/75 R26 tires, Joy stick-controlled steering, Four steering modes: coordinated steer, crab steer, front steer only, rear steer only, Cab can offset to the right side of the machine, Fuel Tank - 240 gal, Machine weighs: 60,000lbs
$178,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 4500
Cab with A/C and heat, 6 way blade 10’ 9” wide, 3 shank rear ripper, 165HP Turbo Diesel, 24” pads, Machine weight: 39,000lbs
$175,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 5700
25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 55,000lbs, Machine width, 9’7”
$175,000
1131.6 miles away - SAN ANTONIO, TX
Hours: 6400
Hydraulic Q/C pin grabber, Counterweight removal system, Cab with A/C and heat, 367HP Turbo Diesel, 52” bucket, 12'10” Stick length, 35.5” triple bar grousers, Machine weight: 115,000lbs, Machine width: 12’ 6” wide,
of 14
Filter by State
