$499,000
1078.0 miles away - AMARILLO, TX
Hours: 3199
3.99% for 48 month financing subject to terms24IN, SIGMA, RIPPER As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$449,000
1128.3 miles away - LUBBOCK, TX
Hours: 3575
Cab, A/C, heat, sigma blade, MS ripper with one shank, 24" SGP. As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$375,000
967.6 miles away - WEATHERFORD, TX
Hours: 2885
Horse Power: 354
STK# KO0364. RENTAL & RPO AVAILABLE! EROPS, Heat/AC, AM/FM Radio, Komatsu 3 Shank Ripper, 15.6 CU YD Komatsu Sigma Blade, Good U/C, New End Bits, Strong Running 354 HP Komatsu SAA6D140E-7 engine, and ONLY 2,885 HOURS! Here is a CLEAN and ALL ORIGINAL 2019 Komatsu D155AX-8 Dozer! This Komatsu D155AX-8 Dozer features EROPS, Heat/AC, AM/FM Radio, Komatsu 3 Shank Ripper, 15.6 CU YD Komatsu Sigma Blade, Good U/C, New End Bits, Strong Running 354 HP Komatsu SAA6D140E-7 engine, and ONLY 2,885 HOURS! Everything on this Komatsu D155AX-8 is READY FOR THE JOBSITE! Please review the attached KOMTRAX and KOMATSU CARE REPORTS. Don't Miss Out! Delivery Could Be As Early As Today! Give us a call with any questions or concerns you may have about purchasing equipment online.
$359,000
856.6 miles away - OKLAHOMA CITY, OK
Hours: 1730
CAB, A/C, PAT BLADE, SWEEPS, REAR SCREEN, MS RIPPER, 30" SGP,, WARRANTY! As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$350,000
987.1 miles away - HEWITT, TX
Hours: 3663
Cab, A/C, 158" wide PAT blade, MS ripper with 3 shanks, 30" SGP. As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$330,000
623.9 miles away - SAVAGE, MN
Hours: 24
$325,000
856.6 miles away - OKLAHOMA CITY, OK
Hours: 2806
Cab, A/C, 152" wide PAT blade, MS ripper, 24" SGP. WARRANTY As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$319,000
1211.3 miles away - ODESSA, TX
Hours: 3438
Cab, A/C, Heat, 169 wide PAT blade, VAIL 5 SHANK RIPPER, 36 single grouser track pads As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$315,000
623.9 miles away - SAVAGE, MN
Hours: 2640
New Komatsu Rails, Sprokets and Upper rollers
$315,000
1211.3 miles away - ODESSA, TX
Hours: 3750
Cab, A/C, heat, PAT blade, MS ripper, 24" SGP. As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$299,000
1059.1 miles away - ABILENE, TX
Hours: 2220
Cab, A/C, Ripper, SU blade, Sweeps, rear screen, actual low hours As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$299,000
443.5 miles away - FINGER, TN
Hours: 3763
Hours: 3763, A/C: Yes, New: Used, Operator Controls: Joystick, ripper: Yes, rippertype: Multi Shank, ROPS Type: Enclosed
$299,000
1059.1 miles away - ABILENE, TX
Hours: 5522
Cab, a/c, integrated intelligent gps, ripper, PAT 158" blade, 30" shoes As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$299,000
856.6 miles away - OKLAHOMA CITY, OK
Hours: 3744
Cab, AC, multi shank ripper, 158 in PAT Power Angle Tilt blade, Komatsu Bull dozer As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$299,000
913.3 miles away - DALLAS, TX
Hours: 4192
Cab, A/C, PAT Blade, 24" SGP, WARRANTY! As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
1078.0 miles away - AMARILLO, TX
Hours: 7544
Cab, a/c, Integrated Intelligent GPS, Ripper, Semi U blade, 24" shoes As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
1059.1 miles away - ABILENE, TX
Hours: 5693
Cab, A/C, LGP 36" shoes, 169" PAT blade, hitch As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
913.3 miles away - DALLAS, TX
Hours: 5433
Cab, a/c, Integrated Intelligent GPS, Ripper, PAT blade As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
744.8 miles away - TULSA, OK
Hours: 4079
Cab, A/C, heater, PAT blade, DUAL UHF/915SS RADIO & ANTENNA, MS ripper with 3 shanks, 34" TGP. As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
1211.3 miles away - ODESSA, TX
Hours: 2312
Cab, A/C, ANGLE blade, REAR SCRN, WINCH As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$298,000
1211.3 miles away - ODESSA, TX
Hours: 2560
Cab, A/C, pipelineANGLE blade, WINCH, REAR SCRN As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$295,000
1128.3 miles away - LUBBOCK, TX
Hours: 4104
Cab, air, Ripper, 24" shoes, PAT 152" blade, As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$294,000
935.0 miles away - FORT WORTH, TX
Hours: 4722
Cab, A/C, Intelligent Integrated GPS, LGP, PAT 152" blade, Drawbar As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$289,000
1211.3 miles away - ODESSA, TX
Hours: 2323
Cab, a/c, winch, Pipeline Angle Blade, 26" shoes, rear screen As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$289,000
1211.3 miles away - ODESSA, TX
Hours: 5630
cab,a/c, LGP, Intelligent integrated GPS, Ripper As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$289,000
935.0 miles away - FORT WORTH, TX
Hours: 4393
Cab, A/C, Ripper, PAT blade, warranty As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$279,500
491.8 miles away - SAUGERTIES, NY
Hours: 5226
Cab. A/C, 13'6" Blade, Single Shank Ripper, Prewired for Grade Control, 24" Pads, Camera
$279,000
1059.1 miles away - ABILENE, TX
Hours: 2209
Cab, A/C, Ripper, Semi U blade, 30" SGP. Sweeps, rear screen, actual low hours As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$279,000
1211.3 miles away - ODESSA, TX
Hours: 5080
Cab, A/C, Intelligent Integrated GPS, LGP, PAT 152" blade, Drawbar, warranty As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
$275,000
935.0 miles away - FORT WORTH, TX
Hours: 4373
Cab, A/C, 169" wide PAT blade, Vail MS ripper with 3 shanks, 36" SGP, As one of the largest sources of used equipment in North America we have the experience and equipment to take care of you. Call Kirby-Smith today! Mileage: 0
of 8
Filter by State
