Select listings to compare them
16 Listings Found
List View Grid View
View Filters

$529,900

418.5 miles away - EAST SYRACUSE, NY
600HP 4-TRACK TIER 4F CUMMINS OSX-15 ENGINE | 24V LED NIGHT LIGHT PACKAGE | GUARDIAN REMOTE TELEMATICS | ACE GRADE AND SLOPE AUTOMATION W/ AUTOCUT | PREWIRED FOR ACE AVERAGING SKI | 6'7" (79") KENNAMETAL SINGLE HIT DRUM W/ 5/8" SPACING | CUTTER HOUSING
Dealer Info
TRACEY ROAD EQUIPMENT
EAST SYRACUSE, NY
418.5 miles away

$445,000

359.1 miles away - Greenville, SC
CUMMINS ENGINE, GROUND CREW CONTROL PANEL
Dealer Info
Hills Machinery
Greenville, SC
359.1 miles away

$295,000

835.5 miles away - BARTOW, FL
Cummins QSL9 450hp @ 2100 rpm diesel engine, Tier 4f, Engine Load control, 3 speed hydrostatic drive 2-wheel rear drive with differential lock, Front steering, 6 mph maximum travel speed, 300 fpm maximum working speed, Hydraulically controlled cut depth, CAN-based electronics, 24 Volt electrical system Four heavy duty single piece wheels prevent rim slippage and tire failure, Tires - 23.5-25 (Rear) 15.5-25 (Front), Variable geometry cutter housing with hinging front and rear doors to control material Seat and console swivel 90 degrees for operation of machine in either direction, Infinitely variable cutter drum speed - from 80 to 160 rpm, 80 gallon (302 L) hydraulic tank, 170-gallon (643 L) fuel capacity CAN Bus controls, Variable speed, demand driven cooling fan, ROPS/FOPS, 2 Work lights Tire ballasts, 78" (2.0 m) Cutter Housing - CHX2-78, 6'6" (78”) (2.0 m) width cutter drum, Bolt-on cutter assembly with hydraulic drive, 50" Diameter Drums (Provide 18" Depth of Cut), 0.8" Spaced Kennametal welded drum
Dealer Info
Newman Tractor
BARTOW, FL
835.5 miles away

$290,000

835.5 miles away - BARTOW, FL
Cummins QSL9 450hp @ 2100 rpm diesel engine, Tier 4f, Engine Load control, 3 speed hydrostatic drive 2-wheel rear drive with differential lock, Front steering, 6 mph maximum travel speed, 300 fpm maximum working speed, Hydraulically controlled cut depth, CAN-based electronics, 24 Volt electrical system Four heavy duty single piece wheels prevent rim slippage and tire failure, Tires - 23.5-25 (Rear) 15.5-25 (Front), Variable geometry cutter housing with hinging front and rear doors to control material Seat and console swivel 90 degrees for operation of machine in either direction, Infinitely variable cutter drum speed - from 80 to 160 rpm, 80 gallon (302 L) hydraulic tank, 170-gallon (643 L) fuel capacity CAN Bus controls, Variable speed, demand driven cooling fan, ROPS/FOPS, 2 Work lights Tire ballasts, 78" (2.0 m) Cutter Housing - CHX2-78, 6'6" (78”) (2.0 m) width cutter drum, Bolt-on cutter assembly with hydraulic drive, 50" Diameter Drums (Provide 18" Depth of Cut), 0.8" Spaced Kennametal welded drum
Dealer Info
Newman Tractor
BARTOW, FL
835.5 miles away

$279,000

418.5 miles away - EAST SYRACUSE, NY
320 HP CUMMINS, (3) 40", 36", 24" DRUMS, GUARDIAN TELEMATICS, CAPABLE OF 12" CUTTING DEPTH
Dealer Info
TRACEY ROAD EQUIPMENT
EAST SYRACUSE, NY
418.5 miles away

$199,900

418.5 miles away - EAST SYRACUSE, NY
CUMMINS QSB 6.7, 230HP| CARLSON EZ-4 SCREED| FRONT MOUNT EXT| (2) 12" AUGER EXT, (2) 18" SCREED EXT| (2) 18" BERM BUILDERS| MOBA MATIC II GRADE/SLOPE AUTOMATION| MOBA SONIC AVG SKI | 39,220LBS WEIGHT | MAX PAVING WIDTH 30' |
Dealer Info
TRACEY ROAD EQUIPMENT
EAST SYRACUSE, NY
418.5 miles away

$179,000

1131.6 miles away - SAN ANTONIO, TX
Cab with A/C and Heat, Cut width: 100", Max Cut Depth: 16", 450HP Cummins® QSX-15. Travel speed: 0-6 mph, High-flotation 620/75 R26 tires, Joy stick-controlled steering, Four steering modes: coordinated steer, crab steer, front steer only, rear steer only, Cab can offset to the right side of the machine, Fuel Tank - 240 gal, Machine weighs: 60,000lbs
Dealer Info
SOUTHERN PLAINS EQUIPMENT
SAN ANTONIO, TX
1131.6 miles away

$119,500

566.9 miles away - DES MOINES, IA
Screed Easy IV serial # 1019
Dealer Info
RMS - Road Machinery & Supplies Co.
DES MOINES, IA
566.9 miles away

$89,750

158.1 miles away - PLEASUREVILLE, KY
Engine : Cummins QSX15 755 HP Condition : Good Cab, heat/AC ,4 Wheel steering, Hydraulic raise and lower, 100" cutting drum, Hydraulic hood raise and lower. Manual grease tank. Engine : Reman at 4,655 hrs
Dealer Info
Clark Heavy Equipment
PLEASUREVILLE, KY
158.1 miles away

$84,590

566.9 miles away - DES MOINES, IA
2018 Roadtec FB-100E Front-Mount Broom 74hp Kubota Tier 4 Final diesel engine 120 Gallon water tank Water Spray System Two (2) 14,000-lb axles 9,100-lb operating weight
 
Dealer Info
RMS - Road Machinery & Supplies Co.
DES MOINES, IA
566.9 miles away

$55,000

314.4 miles away - Mills River, NC
230 HP CUMMINS ENGINE, STANDARD PAVING WIDTH IS 10-19' 6" AND MAXIMUM PAVING WIDTH IS 30 FT.
Dealer Info
Hills Machinery
Mills River, NC
314.4 miles away
12 Days, 21 Hours
Until Auction Start
Auction Lot #: 220367
(HRS SHOW-3499), 2 STATION, 10' SCREED, 18.00-25 TIRES, S/N- 74072443
Dealer Info
Rebel Auction Company
Hazlehurst, GA
559.4 miles away
4 Days, 23 Hours
Until Auction Start
440.6 miles away - Madison, GA
Auction Lot #: 95
Description: This Roadtec RP190 highway-class asphalt paver is a solid, reliable machine well-suited for highway, commercial, and large-scale paving applications. The machine is capable of paving from 10 feet up to 19 feet and is equipped with heated screeds that are operational, helping ensure consistent mat quality and proper material finish. All work lights are functioning properly, making this paver ready for night or low-light operations. The feeder chain was visually inspected and appears to be in good condition, with smooth material flow observed. Augers and screed extensions were checked and operated as they should during inspection. This unit is equipped with Trimble receivers Powered by a John Deere PowerTech diesel engine, the RP190 delivers dependable power for demanding paving jobs. With an operating weight in the approximately 37,000-40,000-pound range, this is a true highway-class paver offering stability, productivity, and durability on the jobsite. This machine would be a strong fit for asphalt contractors, road construction crews, municipal or DOT work, and fleet expansion. Make: Roadtec Model: RP-190 Serial #: RP190-164 Engine Manufacturer: John Deere Fuel: Diesel FASTLINE SALES REPRESENTATIVE(s) Trevor White [email protected] 251-215-3393 Item Location - Address: Provided by Seller Item Location - City: Madison Item Location - State: Georgia Item Location - Postal/Zip Code: 30650 Item Location - Country: United States
Dealer Info
Fastline Auction, LLC
Madison, GA
440.6 miles away

Contact for Price

418.5 miles away - EAST SYRACUSE, NY
OPERATING WEIGHT 39220 LBS | STD PAVING WIDTH 10' - 19'6" | MAX PAVING WIDTH 30' | CUMMING 230HP |
Dealer Info
TRACEY ROAD EQUIPMENT
EAST SYRACUSE, NY
418.5 miles away

Contact for Price

418.5 miles away - EAST SYRACUSE, NY
174HP CUMMINS T4F | HYD SCREED BOOST PACKAGE | 12"X3/4" AUGER EXTS | REV DIST AUGERS | ENVIRO RELEASE SPRAY DOWN SYS | (2) HEATED 12" BOLT ON SCREED EXTS | ROAD LIGHT PACKAGE | 8" HYD TUNNEL EXTS | 11.5 TOB CAPACITY/ SELF-DUMPING HOPPER |
Dealer Info
TRACEY ROAD EQUIPMENT
EAST SYRACUSE, NY
418.5 miles away

Contact for Price

291.3 miles away - Shippensburg, PA
Dealer Info
Quality Rentals & Equipment, LLC
Shippensburg, PA
291.3 miles away